DEPARTMENT OF TRANSPORTATION
DIVISION OF ENGINEERING SERVICES
MATERIALS ENGINEERING AND TESTING SERVICES
Concrete Materials Testing Branch
5900 Folsom Blvd.
Sacramento, CA 95819
916-227-7205
Contract # 040A7104 Cty ALA Rte 880 PM 28.4/29.2
Vendor #
|
Gavin Newsom, Governor |
DEPARTMENT OF TRANSPORTATIONDIVISION OF ENGINEERING SERVICES MATERIALS ENGINEERING AND TESTING SERVICES Concrete Materials Testing Branch 5900 Folsom Blvd. Sacramento, CA 95819 916-227-7205 |
Contract # 040A7104 Cty ALA Rte 880 PM 28.4/29.2 Vendor # |
|
REPORT OF LABORATORY TESTING |
||||
|
Resident Engineer: |
Joy Cheung |
Date Reported: |
09/17/2018 |
|
|
Address: |
TL Number: |
195971 |
||
|
City: |
||||
|
Project Name: WIDEN ROADS, RECONSTRUCT RAMPS WITH HMA, REPLACE 2 CONC OVERCROSSINGS. |
||||
|
Prime Contractor: RGW Construction |
||||
|
Sample Taken Date: |
08/04/2018 |
Mix Design: |
D101C5E1 |
|
|
Contractor: Unknown |
Location : ALAMEDA COUNTY IN ALAMEDA AND OAKLAND FROM 0.2 MILE SOUTH OF 29TH AVENUE OVERCROSSING TO 0.3 MILE NORTH OF 23RD AVENUE OVERCROSSING. |
|||
|
Structure unique identifier: Unknown |
||||
|
Structure name: Unknown |
||||
|
Location of Pour: Unknown |
||||
The following testing has been tested in accordance with:
ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Average diameter of cylinder (in) | Cross sectional area of cylinder (in^2) | Maximum load on cylinder (lb) | Compressive strength of cylinder (psi) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 6.01 | 28.37 | 209042 | 7368.4 | 4 |
| 2 | 6.03 | 28.56 | 219299 | 7678.5 | 1 |
DIME Test ID: 2018-08-04-1-1
Number of specimens: 2
Compressive strength (to nearest 10 psi): 7520
Age of specimen: 44 days
Certified By: Larry McCrum
ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Average diameter of cylinder (in) | Cross sectional area of cylinder (in^2) | Maximum load on cylinder (lb) | Compressive strength of cylinder (psi) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 6.02 | 28.46 | 152545 | 5360.0 | 1 |
| 2 | 6.05 | 28.75 | 155867 | 5421.5 | 1 |
DIME Test ID: 2018-08-04-1-2
Number of specimens: 2
Compressive strength (to nearest 10 psi): 5390
Age of specimen: 10 days
Certified By: Mike Mullins
ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Average diameter of cylinder (in) | Cross sectional area of cylinder (in^2) | Maximum load on cylinder (lb) | Compressive strength of cylinder (psi) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 6.01 | 28.37 | 195659 | 6896.7 | 1 |
| 2 | 6.00 | 28.27 | 197637 | 6991.1 | 1 |
DIME Test ID: 2018-08-04-1-3
Number of specimens: 2
Compressive strength (to nearest 10 psi): 6940
Age of specimen: 31 days
Certified By: Mike Mullins
ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Average diameter of cylinder (in) | Cross sectional area of cylinder (in^2) | Maximum load on cylinder (lb) | Compressive strength of cylinder (psi) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 6.01 | 28.37 | 149419 | 5266.8 | 1 |
| 2 | 6.03 | 28.56 | 151073 | 5289.7 | 1 |
DIME Test ID: 2018-08-04-1-4
Number of specimens: 2
Compressive strength (to nearest 10 psi): 5280
Age of specimen: 9 days
Certified By: Mike Mullins
|
*Subject to final inspection by the Resident Engineer. |
|
TL- Report of Laboratory Testing