Print Report | Back to Sample Detail

Sample Record for 2018-05-15-28

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212887 DEA: 024F79U4 QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-151-5.5/R5.8
Work Description: HMA/RHMA PAVING AND ADA SIDEWALK WORK.
Location Description: SHASTA COUNTY IN SHASTA LAKE CITY FROM PANCAKE HILL DRIVE TO LOCUST AVENUE
Contractor Name: S.T. RHOADES CONSTRUCTION, INC.
Contractor Address: Unknown
Resident Engineer: Sunil Repaka Structure Rep.: Jim Wood

Sample Information

DIME Sample ID: 2018-05-15-28
TL Number from the TL Form: 002177
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 05/15/2018
Date that the sample was received by the laboratory/organization performing the testing: 05/15/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: Cold Feed, 1/-inch Type G Aggregate, Treated
From where was the sample collected: Manufacturer
Laboratory sample identification: D77383
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tullis Inc, Northstate Asphalt, Redding CA

Material Information

Source Identification (SMARA or name of Pit): 91-45-0057::SHASTA RANCH AGGREGATES
The fabricator's/manufacturer's product name for the sample: 1/2-inch Type G Aggregate Treated
The fabricator/manufacturer designation for the sample: L180451
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: JMF 18-11-S1
Lot number:
Sublot number:

Test Results

Test 1 of 1

DIME Test ID: 2018-05-15-28-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 08/02/2018
Date Tested: 05/16/2018
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 96.4 %
Cumulative percent passing the 3/8 in. sieve 86.2 %
Cumulative percent passing the 1/4 in. sieve 56.5 %
Cumulative percent passing the #4 sieve 38 %
Cumulative percent passing the #8 sieve 20.1 %
Cumulative percent passing the #16 sieve 13.3 %
Cumulative percent passing the #30 sieve 9.5 %
Cumulative percent passing the #50 sieve 6.8 %
Cumulative percent passing the #100 sieve 5.1 %
Cumulative percent passing the #200 sieve 3.91 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.