Print Report | Back to Sample Detail

Sample Record for 2018-05-27-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213058 DEA: 010G6804 EFIS: 0117000045 QA Service Level: 1
DIST-CO-RTE-PM: 01-MEN-253-0.0-17.6 / 30-28.4 / 23.3-19.8
Work Description: COLD PLANE, PLACE HMA AND MICROSURFACING
Location Description: MENDOCINO COUNTY NEAR BOONVILLE FROM 0.5 MILE WEST OF ANDERSON CREEK BRIDGE TO ROUTE 253/101 SEPARATION
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 1324 South State Street, Ukiah, CA 95482
Resident Engineer: Arjun Subedi Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-05-27-1
TL Number from the TL Form: 978561
Sample Submitted By Organization: CT D01 - Field Laboratory
Sample Organization Contact: (707) 445-6373
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 05/27/2018
Date that the sample was received by the laboratory/organization performing the testing: 05/30/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3/4 Cold feed
From where was the sample collected: Manufacturer
Laboratory sample identification: 61953
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Ukiah

Material Information

Source Identification (SMARA or name of Pit): 91-23-0015::HARRIS QUARRY
The fabricator's/manufacturer's product name for the sample: 1417
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: Unknown
Lot number:
Sublot number:

Test Results

Test 1 of 7

DIME Test ID: 2018-05-27-1-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 07/24/2018
Date Tested: 07/24/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 99 %
Cumulative percent passing the 1/2 in. sieve 89 %
Cumulative percent passing the 3/8 in. sieve 81 %
Cumulative percent passing the 1/4 in. sieve 81 %
Cumulative percent passing the #4 sieve 52 %
Cumulative percent passing the #8 sieve 34 %
Cumulative percent passing the #16 sieve 20 %
Cumulative percent passing the #30 sieve 12 %
Cumulative percent passing the #50 sieve 8 %
Cumulative percent passing the #100 sieve 5 %
Cumulative percent passing the #200 sieve 3.3 %

Test 2 of 7

DIME Test ID: 2018-05-27-1-2
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Verified Date: 07/24/2018
Date Tested: 07/24/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Method 2 - Individual Fracture Determination
Aggregate Size and Fracture Type Coarse 1 and 2 Faced and Fine 1 Faced
Weighted average percentage of fractured, coarse, 2 faced particles 100 %
Weighted average percentage of fractured, coarse, 1 faced particles 100 %
Percentage of fractured, fine, 1 faced particles tested 100 %

Test 3 of 7

DIME Test ID: 2018-05-27-1-3
Test Method: AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)
Verified Date: 07/24/2018
Date Tested: 07/24/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Grading designation B
Percent loss after 100 revolutions 4 %
Percent loss after 500 revolutions 14 %

Test 4 of 7

DIME Test ID: 2018-05-27-1-4
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 07/24/2018
Date Tested: 07/24/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 68

Test 5 of 7

DIME Test ID: 2018-05-27-1-5
Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)
Verified Date: 07/24/2018
Date Tested: 07/24/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What test method is performed? Method A
Bulk dry specific gravity 2.716
Average uncompacted voids 45 %

Test 6 of 7

DIME Test ID: 2018-05-27-1-6
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Verified Date: 07/24/2018
Date Tested: 07/24/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk specific gravity 2.716
Bulk specific gravity (SSD Basis) 1.782
Apparent specific gravity 2.909
Absorption 2.4 %

Test 7 of 7

DIME Test ID: 2018-05-27-1-7
Test Method: AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)
Verified Date: 07/24/2018
Date Tested: 07/24/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Basis for relative density testing Bulk
Specific Gravity 2.867
Absorption 0.9 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.