Print Report | Back to Sample Detail

Sample Record for 2018-04-09-15

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212886 DEA: 023H1204 QA Service Level: 1
DIST-CO-RTE-PM: 02-TEH-5-R0.0/R22.4
Work Description: COLD PLANE RAC-O, PLACE RHMA-O, REPLACE AC SURFACING, MBGR
Location Description: TEHAMA COUNTY AT AND NEAR CORNING FROM GLENN COUNTY LINE TO 0.3 MILE NORTH OF BRANCH COYOTE CREEK BRIDGE
Contractor Name: TULLIS INC
Contractor Address: P O BOX 493416, REDDING CA 96049
Resident Engineer: Henry Benner Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-04-09-15
TL Number from the TL Form: 852096
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 04/09/2018
Date that the sample was received by the laboratory/organization performing the testing: 04/10/2018
The quantity of what the sample constitutes: JMF Renewal
A brief description of the sample: Combined RAP
From where was the sample collected: Manufacturer
Laboratory sample identification: D77319B
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tullis, Inc - Northstate Asphalt - Redding, CA

Material Information

RAP Source: Tullis, Northstate Asphalt
Aggregate Size: Combined 1/2-inch
Aggregate Source: Unknown
RAP Stockpile: Static
Stockpile Size (tons): Unknown

Test Results

Test 1 of 3

DIME Test ID: 2018-04-09-15-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 07/12/2018
Date Tested: 04/11/2018
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Asphalt Binder Content 6.29 %
Correction Factor (Percent by mass of HMA Specimen) no data

Test 2 of 3

DIME Test ID: 2018-04-09-15-2
Test Method: AASHTO T30-15: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 07/12/2018
Date Tested: 07/11/2018
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Cumulative percent passing the 2 in. sieve no data
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 93.9 %
Cumulative percent passing the 3/8 in. sieve 81.9 %
Cumulative percent passing the 1/4 in. sieve 64.9 %
Cumulative percent passing the #4 sieve 56.1 %
Cumulative percent passing the #8 sieve 40.5 %
Cumulative percent passing the #16 sieve 30 %
Cumulative percent passing the #30 sieve 23.1 %
Cumulative percent passing the #50 sieve 16.9 %
Cumulative percent passing the #100 sieve 12.1 %
Cumulative percent passing the #200 sieve 9.02 %

Test 3 of 3

DIME Test ID: 2018-04-09-15-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 07/12/2018
Date Tested: 04/11/2018
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Specific Gravity for Sample 1 2.519

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.