Print Report | Back to Sample Detail

Sample Record for 2018-07-05-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: No Project QA Service Level:

DIST-CO-RTE-PM: ---

Work Description: Special project identifier for material not associated with a project

Location Description:

Contractor Name: Unknown

Contractor Address: Unknown

Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-07-05-4

TL Number from the TL Form:

Sample Submitted By Organization: CT HQ - QASI Los Angeles Field Office

Sample Organization Contact: (858) 285-5797

Type of Sample: Stock

Type of Material: SMTL TM3 - Fastener Assembly

Sample Taken Date: 07/05/2018

Date that the sample was received by the laboratory/organization performing the testing: 07/05/2018

The quantity of what the sample constitutes: 48

A brief description of the sample: F1554 Grade 55 HDG Anchor Bolts

From where was the sample collected: Manufacturer

Laboratory sample identification:

Structure unique identifier:

Structure name:

The fabricator/manufacturer/facility name: AM Nut and Bolt

Material Information

Rocap Number(s): N/a

Heat Number(s): 3078715

Nut Mfg. Lot Number(s): 75070239

Washer Mfg. Lot Number(s): 278507

Bolt Specification: F1554

Bolt Length(s): 36"

Nut Specification: A563

Washer Specification: F436

Finish: Galvanized

Diameter/Size: 1"

Bolt Mfg. Lot Number: 42744

Rocap Test Requirement(s):

Lubricant Requirements(s):

Test Results

Test 1 of 17

DIME Test ID: 2018-07-05-4-1

Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)

Verified Date: 08/01/2018

Date Tested: 07/18/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test: Proof Load

Test Result Compliance:

Additional Comments When Verified:

Number of Samples

Sample	Bolt Mfg. Lot Number	Size (in)	Peak Load (lbf)	Peak Load (kN)	Comments	Tested By
1A	28220-75070239	1-8 HEX	93484	415.84	Proof Load	Brian

UTM

400KIP

Temperature

72 F

Test 2 of 17

DIME Test ID: 2018-07-05-4-2

Verified Date: 08/01/2018

Date Tested: 07/18/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test: Proof Load

Test Result Compliance:

Additional Comments When Verified:

Number of Samples

Sample	Bolt Mfg. Lot Number	Size (in)	Peak Load (lbf)	Peak Load (kN)	Comments	Tested By
1B	28220-75070239	1-8 HEX	108240	481.45	Proof Load	Brian

UTM

400KIP

Temperature

72 F

Test 3 of 17

DIME Test ID: 2018-07-05-4-3

Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)

Verified Date: 08/01/2018

Date Tested: 07/18/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Number of Samples

Sample	Heat Number	Diameter (in)	Area (sqin)	Stress at Offset (psi)	Tensile Strength (psi)	Elongation in 4 x d (%)	Tested By
1	3078715	0.501	0.197	64052	90200	26.5	Brian

UTM

67KIP

Temperature

72 f

Test 4 of 17

DIME Test ID: 2018-07-05-4-4

Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)

Verified Date: 08/01/2018

Date Tested: 07/18/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Number of Samples

Sample	Heat Number	Diameter (in)	Area (sqin)	Stress at Offset (psi)	Tensile Strength (psi)	Elongation in 4 x d (%)	Tested By
2	3078715	0.502	0.198	64087	89780	26.7	Brian

UTM

67KIP

Temperature

72 f

Test 5 of 17

DIME Test ID: 2018-07-05-4-5

Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)

Verified Date: 08/01/2018

Date Tested: 07/26/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1A
Rocap Number	no data
Heat Number(s)	3078715
Mfg. Lot Number	no data
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	YELLOW PAINT
Size	1 in
Bolt Length	36 in
Gage Type	Pass

Test 6 of 17

DIME Test ID: 2018-07-05-4-6

Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)

Verified Date: 08/01/2018

Date Tested: 07/26/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1A
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	28220-75070239
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	U 2HZN
Size	1 in
Gage Type	Pass

Test 7 of 17

DIME Test ID: 2018-07-05-4-7

Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)

Verified Date: 08/01/2018

Date Tested: 07/26/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1B
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	28220-75070239
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	U 2HZN
Size	1 in
Gage Type	Pass

Test 8 of 17

DIME Test ID: 2018-07-05-4-8

Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)

Verified Date: 08/01/2018

Date Tested: 07/26/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1C
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	28220-75070239
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	U 2HZN
Size	1 in
Gage Type	Pass

Test 9 of 17

DIME Test ID: 2018-07-05-4-9

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 08/01/2018

Date Tested: 07/26/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1A
Rocap Number	no data
Heat Number(s)	3078715
Mfg. Lot Number	no data
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	YELLOW PAINT
Size	1 in
Bolt Length	36 in
Measurement Average	4.36 mils

Test 10 of 17

DIME Test ID: 2018-07-05-4-10

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 08/01/2018

Date Tested: 07/26/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1A
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	28220-75070239
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	U 2HZN
Size	1 in
Bolt Length	no data in
Measurement Average	5.63 mils

Test 11 of 17

DIME Test ID: 2018-07-05-4-11

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 08/01/2018

Date Tested: 07/26/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1B
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	28220-75070239
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	U 2HZN
Size	1 in
Bolt Length	no data in
Measurement Average	6.35 mils

Test 12 of 17

DIME Test ID: 2018-07-05-4-12

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 08/01/2018

Date Tested: 07/26/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1C
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	28220-75070239
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	U 2HZN
Size	1 in
Bolt Length	no data in
Measurement Average	5.14 mils

Test 13 of 17

DIME Test ID: 2018-07-05-4-13

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 08/01/2018

Date Tested: 07/26/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1A
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	307240
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	WS
Size	1 in
Bolt Length	no data in
Measurement Average	3.04 mils

Test 14 of 17

DIME Test ID: 2018-07-05-4-14

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 08/01/2018

Date Tested: 07/26/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1B
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	307240
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	WS
Size	1 in
Bolt Length	no data in
Measurement Average	4.01 mils

Test 15 of 17

DIME Test ID: 2018-07-05-4-15

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 08/01/2018

Date Tested: 07/26/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1C
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	307240
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	WS
Size	1 in
Bolt Length	no data in
Measurement Average	3.63 mils

Test 16 of 17

DIME Test ID: 2018-07-05-4-16

Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)

Verified Date: 08/01/2018

Date Tested: 07/26/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1A
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	307240
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	WS
Size	1 in
Bolt Length	no data in
Hardness Reading Scale	C Scale
Hardness Reading Average	41.75
Spacing	Ok

Test 17 of 17

DIME Test ID: 2018-07-05-4-17

Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)

Verified Date: 08/01/2018

Date Tested: 07/26/2018

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1B
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	307240
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	WS
Size	1 in
Bolt Length	no data in
Hardness Reading Scale	C Scale
Hardness Reading Average	40.5
Spacing	Ok