Sample Record for 2018-06-18-4
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 210490 Permit Numbers: 0711NMC1061 0713NRT1641 0716NRT0073 0716NRT2321 0717NRT2707 0717NRT2428 0717NRT0600 0716NRT1660 0716NRT0559 0714NRW0422 0714NRW0753 0715NRT1289
QA Service Level: 1
DIST-CO-RTE-PM: 07-VEN-101-30.1/30.1
Work Description: Remove and replace the existing bridge railing along west edge of the structure with new 6' high ornamental railing; install streetlights; remove and replace the existing chainlink fence and gate at the south end of the bridge with new fence; install power conduits in the existing walkway along
Location Description: California Street OC, Ventura
Contractor Name: UNION ENGINEERING COMPANY INC
Contractor Address: P O BOX 1000, VENTURA CA 93002
Resident Engineer: Pantaleon Rivera Structure Rep.: Pantaleon Rivera
Sample Information
DIME Sample ID: 2018-06-18-4
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT - Unassigned/General Field Laboratory
Sample Organization Contact: 5625005861
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 06/18/2018
Date that the sample was received by the laboratory/organization performing the testing: 06/18/2018
The quantity of what the sample constitutes: 49
A brief description of the sample: 7/8
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Columbia Steel
Material Information
Rocap Number(s): L1412643
Heat Number(s):
Nut Mfg. Lot Number(s): 24262-6214161404
Washer Mfg. Lot Number(s): D3436
Bolt Specification: F3125
Bolt Length(s): 3 3/4"
Nut Specification: A563
Washer Specification: F436
Finish: Mechanically Galvanized
Diameter/Size: 7/8"
Bolt Mfg. Lot Number: 772021
Rocap Test Requirement(s):
Lubricant Requirements(s):
Test Results
Test 1 of 9
DIME Test ID: 2018-06-18-4-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 07/12/2018
Date Tested: 07/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
|
Number of Bolt Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | | 1A | 772021 | 7/8\" | 68625 | 305.3 | 10 | A325 | Brian |
| |
|
UTM
|
400KIP
|
|
Temperature
|
no data
|
Test 2 of 9
DIME Test ID: 2018-06-18-4-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 07/12/2018
Date Tested: 07/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Loop Failure
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | | 1A | 24262-6214161404 | 7/8\" | 0 | 0 | Loop Failure | Brian |
| |
|
UTM
|
400KIP
|
|
Temperature
|
72 F
|
Test 3 of 9
DIME Test ID: 2018-06-18-4-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 07/12/2018
Date Tested: 07/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | | 1A | 24262-6214161404 | 7/8\" | 70746 | 314.69 | Nut Proof Load | Brian |
| |
|
UTM
|
400KIP
|
|
Temperature
|
72 F
|
Test 4 of 9
DIME Test ID: 2018-06-18-4-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 07/12/2018
Date Tested: 07/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
772021
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 LE USA
|
|
Size
|
.875 in
|
|
Bolt Length
|
3.75 in
|
|
Gage Type
|
Pass
|
Test 5 of 9
DIME Test ID: 2018-06-18-4-5
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 07/12/2018
Date Tested: 07/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
24262-6214161404
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
U DH
|
|
Size
|
.875 in
|
|
Gage Type
|
NA
|
Test 6 of 9
DIME Test ID: 2018-06-18-4-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 07/12/2018
Date Tested: 07/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
772021
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 LE USA
|
|
Size
|
.875 in
|
|
Bolt Length
|
3.75 in
|
|
Measurement Average
|
3.81 mils
|
Test 7 of 9
DIME Test ID: 2018-06-18-4-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 07/12/2018
Date Tested: 07/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
24262-6214161404
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
U DH
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.25 mils
|
Test 8 of 9
DIME Test ID: 2018-06-18-4-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 07/12/2018
Date Tested: 07/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D3436
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
P F436
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.15 mils
|
Test 9 of 9
DIME Test ID: 2018-06-18-4-9
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 07/12/2018
Date Tested: 07/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D3436
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
P F436
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
41.15
|
|
Spacing
|
Ok
|
