Print Report | Back to Sample Detail

Sample Record for 2018-06-15-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212741 DEA: 020E1804 EFIS: 0200000022 QA Service Level: 1
DIST-CO-RTE-PM: 02-PLU-89-29.8/30.2
Work Description: BRIDGE REPLACEMENT
Location Description: PLUMAS COUNTY NEAR CANYON DAM FROM 0.2 MILE SOUTH TO 0.3 MILE NORTH OF LAKE ALMANOR SPILLWAY
Contractor Name: Q&D CONSTRUCTION, INC.
Contractor Address: P.O Box 10865, Reno, NV 89510
Resident Engineer: Ryan Johnson Structure Rep.: Matt Crete

Sample Information

DIME Sample ID: 2018-06-15-3
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Acceptance
Type of Material: SMTL TM7 - Epoxy Coated Rebar
Sample Taken Date: 06/15/2018
Date that the sample was received by the laboratory/organization performing the testing: 06/19/2018
The quantity of what the sample constitutes: 5 heats 2 powder batches
A brief description of the sample: green coated rebar
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CMC Brighton CO

Material Information

Rebar Heat Number(s): 3 - 1202001236 4 - 4074535 5 - 4074245 5 - 4074328 9 - 4067634
Rebar Epoxy Batch Number(s): UE86724NA UA34962NA
Rebar Coating Specification: ASTM A775
Rebar Size (#): 3 4 5 9
Rebar Coating Color: Green
Rebar Manufacturer: Nucor,CMC
Rebar Coater: CMC Brighton CO
Rebar Powder Manufacturer: AkzoNobel Surface Chemistry, LLC
Release Number: Not applicable
Quality Assurance Code: Not applicable
Test results on following page(s): 7

Test Results

Test 1 of 7

DIME Test ID: 2018-06-15-3-1
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 06/25/2018
Date Tested: 06/20/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
First Bar Mean 8.85
Second Bar Mean 10.27
Lower spec. limit LSL 7
Upper spec. limit USL 12
Bar # for First Bar no data
Bar # for Second Bar no data
Total mean value 9.56
Total number of values less than LSL no data
Total number of values greater than USL no data

Test 2 of 7

DIME Test ID: 2018-06-15-3-2
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Holiday)
Verified Date: 06/25/2018
Date Tested: 06/20/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Total Number of Holiday 0
Total Length 2.6
Holidays Per Linear Foot of Bar 0
Holiday Test Pass/Fail Pass
Bend Test Pass/Fail Pass

Test 3 of 7

DIME Test ID: 2018-06-15-3-3
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 06/25/2018
Date Tested: 06/20/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test: #4
Test Result Compliance:
Additional Comments When Verified:
First Bar Mean 6.98
Second Bar Mean 6.62
Lower spec. limit LSL 7
Upper spec. limit USL 12
Bar # for First Bar no data
Bar # for Second Bar no data
Total mean value 6.8
Total number of values less than LSL no data
Total number of values greater than USL no data

Test 4 of 7

DIME Test ID: 2018-06-15-3-4
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 06/25/2018
Date Tested: 06/20/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test: #5 Rebar Heat #4074328
Test Result Compliance:
Additional Comments When Verified:
First Bar Mean 7.06
Second Bar Mean 6.73
Lower spec. limit LSL 7
Upper spec. limit USL 12
Bar # for First Bar no data
Bar # for Second Bar no data
Total mean value 6.89
Total number of values less than LSL no data
Total number of values greater than USL no data

Test 5 of 7

DIME Test ID: 2018-06-15-3-5
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 06/25/2018
Date Tested: 06/20/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
First Bar Mean 6.99
Second Bar Mean 6.45
Lower spec. limit LSL 7
Upper spec. limit USL 12
Bar # for First Bar no data
Bar # for Second Bar no data
Total mean value 6.72
Total number of values less than LSL no data
Total number of values greater than USL no data

Test 6 of 7

DIME Test ID: 2018-06-15-3-6
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 06/25/2018
Date Tested: 06/20/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
First Bar Mean 8.65
Second Bar Mean 7.95
Lower spec. limit LSL 7
Upper spec. limit USL 16
Bar # for First Bar no data
Bar # for Second Bar no data
Total mean value 8.3
Total number of values less than LSL no data
Total number of values greater than USL no data

Test 7 of 7

DIME Test ID: 2018-06-15-3-7
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Holiday)
Verified Date: 06/25/2018
Date Tested: 06/20/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Total Number of Holiday 0
Total Length 2.6
Holidays Per Linear Foot of Bar 0
Holiday Test Pass/Fail Pass
Bend Test Pass/Fail Pass