Sample Record for 2018-05-13-2
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 212574 DEA: 02368414 EFIS: 0215000066
QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-44-R4.6/R6.4
Work Description: CONSTRUCT OVERCROSSING, WIDEN WITH HMA AND AB, AND OVERLAY WITH HMA
Location Description: SHASTA COUNTY NEAR PALO CEDRO FROM CLOUGH CREEK BRIDGE TO 0.6 MILE WEST OF DESCHUTES ROAD UNDERCROSSING
Contractor Name: TULLIS, INC.
Contractor Address: P O BOX 493416, REDDING CA 96049
Resident Engineer: Nathan Alexander Structure Rep.: Chaffie Eric
Sample Information
DIME Sample ID: 2018-05-13-2
TL Number from the TL Form: 896274
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 05/13/2018
Date that the sample was received by the laboratory/organization performing the testing: 05/14/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: Cold Feed, Treated Virgin 1/2-inch Type A
From where was the sample collected: Manufacturer
Laboratory sample identification: D77368A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tullis, Inc - Northstate Asphalt - Redding, CA
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-45-0057
The fabricator's/manufacturer's product name for the sample: Treated Virgin 1/2-inch Type A Aggregate
The fabricator/manufacturer designation for the sample: L170860
The plant number: Unknown
A detailed description of where the material sample was collected: Plant Sampler
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: JMF 18-01-S3
Lot number:
Sublot number:
Aggregate Mix Number:
Test Results
Test 1 of 1
DIME Test ID: 2018-05-13-2-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 07/16/2018
Date Tested: 05/14/2018
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
What type of gradation is being tested?
|
HMA Gradation
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
Cumulative percent passing the 1/2 in. sieve
|
95.7 %
|
Cumulative percent passing the 3/8 in. sieve
|
82.7 %
|
Cumulative percent passing the 1/4 in. sieve
|
65.5 %
|
Cumulative percent passing the #4 sieve
|
56.5 %
|
Cumulative percent passing the #8 sieve
|
35.8 %
|
Cumulative percent passing the #16 sieve
|
23.9 %
|
Cumulative percent passing the #30 sieve
|
16.5 %
|
Cumulative percent passing the #50 sieve
|
11.6 %
|
Cumulative percent passing the #100 sieve
|
8.5 %
|
Cumulative percent passing the #200 sieve
|
6.58 %
|