Print Report | Back to Sample Detail

Sample Record for 2018-04-13-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212948 DEA: 010F8604 EFIS: 0116000075 QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM,DN-101-R131.7/R137.2,M0.0/M0.1
Work Description: RHMA, COLD PLANE AND HMA AT RAMPS, REPLACE GUARDRAIL WITH MGS
Location Description: HUMBOLDT AND DEL NORTE COUNTIES NEAR ORICK FROM 2.5 MILES NORTH OF BOYES CREEK VIADUCT TO NORTH PRAIRIE CREEK UNDERCROSSING
Contractor Name: TIDEWATER CONTRACTORS, INC
Contractor Address: P O BOX 1956, BROOKINGS, OR 97415
Resident Engineer: Clayton Malmberg Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-04-13-4
TL Number from the TL Form: 972601
Sample Submitted By Organization: CT D01 - Field Laboratory
Sample Organization Contact: (707) 445-6373
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 04/13/2018
Date that the sample was received by the laboratory/organization performing the testing: 04/16/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: virgin aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: 61919
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tidewater Smith River

Material Information

Source Identification (SMARA or name of Pit): 91-08-0002::HUFFMAN BAR
The fabricator's/manufacturer's product name for the sample: 18-1454.09
The fabricator/manufacturer designation for the sample: 18-1454.09
The plant number: Unknown
A detailed description of where the material sample was collected: cold feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: Unknown
Lot number:
Sublot number:

Test Results

Test 1 of 7

DIME Test ID: 2018-04-13-4-1
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Verified Date: 04/26/2018
Date Tested: 04/26/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Method 1 - Combined Fracture Determination
Aggregate Size and Fracture Type Coarse 1 and 2 Faced and Fine 1 Faced
Percentage of fractured, coarse, 2 faced particles tested 100 %
Percentage of fractured, coarse, 1 faced particles tested 100 %
Percentage of fractured, fine, 1 faced particles tested 100 %

Test 2 of 7

DIME Test ID: 2018-04-13-4-2
Test Method: AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)
Verified Date: 04/26/2018
Date Tested: 04/26/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Grading designation B
Percent loss after 100 revolutions 4 %
Percent loss after 500 revolutions 18 %

Test 3 of 7

DIME Test ID: 2018-04-13-4-3
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 04/26/2018
Date Tested: 04/26/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 55

Test 4 of 7

DIME Test ID: 2018-04-13-4-4
Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)
Verified Date: 04/26/2018
Date Tested: 04/26/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What test method is performed? Method A
Bulk dry specific gravity 2.612
Average uncompacted voids 45 %

Test 5 of 7

DIME Test ID: 2018-04-13-4-5
Test Method: ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)
Verified Date: 04/26/2018
Date Tested: 04/26/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Method B
Determination By Mass
Dimensional ratio used 1:5
Weighted percentage of particles (by mass) that were flat and elongated 1 %
Weighted percentage of particles (by mass) that were not flat and elongated 99 %

Test 6 of 7

DIME Test ID: 2018-04-13-4-6
Test Method: AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)
Verified Date: 04/26/2018
Date Tested: 04/26/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Basis for relative density testing Bulk
Specific Gravity 2.761
Absorption 1 %

Test 7 of 7

DIME Test ID: 2018-04-13-4-7
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Verified Date: 04/26/2018
Date Tested: 04/26/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk specific gravity 2.612
Bulk specific gravity (SSD Basis) 2.709
Apparent specific gravity 2.892
Absorption 3.7 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.