Print Report | Back to Sample Detail

Sample Record for 2018-04-13-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212948 DEA: 010F8604 EFIS: 0116000075 QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM,DN-101-R131.7/R137.2,M0.0/M0.1
Work Description: RHMA, COLD PLANE AND HMA AT RAMPS, REPLACE GUARDRAIL WITH MGS
Location Description: HUMBOLDT AND DEL NORTE COUNTIES NEAR ORICK FROM 2.5 MILES NORTH OF BOYES CREEK VIADUCT TO NORTH PRAIRIE CREEK UNDERCROSSING
Contractor Name: TIDEWATER CONTRACTORS, INC
Contractor Address: P O BOX 1956, BROOKINGS, OR 97415
Resident Engineer: Clayton Malmberg Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-04-13-3
TL Number from the TL Form: 972601
Sample Submitted By Organization: CT D01 - Field Laboratory
Sample Organization Contact: (707) 445-6373
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 04/13/2018
Date that the sample was received by the laboratory/organization performing the testing: 04/16/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: virgin aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: 61919
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tidewater Smith River

Material Information

Source Identification (SMARA or name of Pit): 91-08-0002
The fabricator's/manufacturer's product name for the sample: 18-1454.09
The fabricator/manufacturer designation for the sample: 18-1454.09
The plant number: Unknown
A detailed description of where the material sample was collected: cold feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: Unknown
Lot number:
Sublot number:

Test Results

Test 1 of 1

DIME Test ID: 2018-04-13-3-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 04/19/2018
Date Tested: 04/19/2018
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 99 %
Cumulative percent passing the 3/8 in. sieve 83 %
Cumulative percent passing the 1/4 in. sieve 83 %
Cumulative percent passing the #4 sieve 31 %
Cumulative percent passing the #8 sieve 17 %
Cumulative percent passing the #16 sieve 11 %
Cumulative percent passing the #30 sieve 8 %
Cumulative percent passing the #50 sieve 6 %
Cumulative percent passing the #100 sieve 5 %
Cumulative percent passing the #200 sieve 3.7 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.