Print Report | Back to Sample Detail

Sample Record for 2018-02-27-13

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212679 DEA: 023E7204 EFIS: 0200020154 QA Service Level: 1
DIST-CO-RTE-PM: 02-TEH-36-42.1/46.0
Work Description: COLD PLANING, PAVING, MINOR CONCRETE, ELECTRICAL AND STRIPING WORK.
Location Description: TEHAMA COUNTY IN AND NEAR RED BLUFF FROM EAST SAND SLOUGH BRIDGE TO 0.6 MILE EAST OF STICE ROAD
Contractor Name: TULLIS, INC.
Contractor Address: 16951 Clear Creek Rd., Redding, CA 96049
Resident Engineer: Anthony Granados Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-02-27-13
TL Number from the TL Form: 852086
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 02/27/2018
Date that the sample was received by the laboratory/organization performing the testing: 02/27/2018
The quantity of what the sample constitutes: JMF
A brief description of the sample: Virgin 1/2-inch Type A
From where was the sample collected: Manufacturer
Laboratory sample identification: D77291A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tullis, Inc - Northstate Asphalt - Redding, CA

Material Information

Source Identification (SMARA or name of Pit): 91-45-0057::SHASTA RANCH AGGREGATES
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: Unknown
Lot number:
Sublot number:

Test Results

Test 1 of 1

DIME Test ID: 2018-02-27-13-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 03/27/2018
Date Tested: 02/27/2018
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Total mass of material in the sample 3034.1 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 0 grams
Cumulative mass retained on the 1/2 in. sieve 162 grams
Cumulative mass retained on the 3/8 in. sieve 515 grams
Mass retained on the 1/4 in. sieve 1028 grams
Cumulative mass retained on the #4 sieve 1313 grams
Total sample mass passing the #4 sieve 1721.1 grams
Total mass of fine material in the sample 502.3 grams
Cumulative mass retained on the #8 sieve 181.7 grams
Cumulative mass retained on the #16 sieve 292.1 grams
Cumulative mass retained on the #30 sieve 358.2 grams
Cumulative mass retained on the #50 sieve 400.2 grams
Cumulative mass retained on the #100 sieve 427.4 grams
Cumulative mass retained on the #200 sieve 444.3 grams
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 95 %
Cumulative percent passing the 3/8 in. sieve 83 %
Cumulative percent passing the 1/4 in. sieve 66 %
Cumulative percent passing the #4 sieve 57 %
Cumulative percent passing the #8 sieve 36 %
Cumulative percent passing the #16 sieve 24 %
Cumulative percent passing the #30 sieve 16 %
Cumulative percent passing the #50 sieve 12 %
Cumulative percent passing the #100 sieve 8 %
Cumulative percent passing the #200 sieve 6.6 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.