Print Report | Back to Sample Detail

Sample Record for 2017-04-20-22

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: No Project QA Service Level:
DIST-CO-RTE-PM: ---
Work Description: Special project identifier for material not associated with a project
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2017-04-20-22
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Quality Control
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 04/20/2017
Date that the sample was received by the laboratory/organization performing the testing: 04/20/2017
The quantity of what the sample constitutes: Mix Design
A brief description of the sample: Combined RAP
From where was the sample collected: Manufacturer
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tullis Inc - Northstate Asphalt - Redding, CA

Material Information

RAP Source: Northstate Asphalt
Aggregate Size: Unknown
Aggregate Source: Unknown
RAP Stockpile: Static
Stockpile Size (tons): Unknown
Reclaimed Asphalt Pavement Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2017-04-20-22-1
Test Method: AASHTO T164-14: Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA) (Asphalt Binder Content)
Verified Date: 03/21/2018
Date Tested: 04/20/2017
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: Data input by Ward Jenkins for PEI during beta.
Test Result Compliance:
Additional Comments When Verified:
Corrected Asphalt Binder Content 4.89 %

Test 2 of 2

DIME Test ID: 2017-04-20-22-2
Test Method: AASHTO T30-15: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 03/21/2018
Date Tested: 04/20/2017
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: Data input by Ward Jenkins for PEI during beta. 1/4 in. sieve value is speculative.
Test Result Compliance:
Additional Comments When Verified:
Cumulative percent passing the 2 in. sieve no data
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 95.5 %
Cumulative percent passing the 3/8 in. sieve 89.7 %
Cumulative percent passing the 1/4 in. sieve 79.8 %
Cumulative percent passing the #4 sieve 69.9 %
Cumulative percent passing the #8 sieve 52.8 %
Cumulative percent passing the #16 sieve 37.8 %
Cumulative percent passing the #30 sieve 26 %
Cumulative percent passing the #50 sieve 17.5 %
Cumulative percent passing the #100 sieve 11.8 %
Cumulative percent passing the #200 sieve 7.8 %