Print Report | Back to Sample Detail

Sample Record for 2018-02-12-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 211819 DEA: 080G7704 EFIS: 0814000175 QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-15-0.00/41.80
Work Description: INSTALL TMS FIELD ELEMENTS
Location Description: RIVERSIDE COUNTY FROM SAN DIEGO COUNTY LINE TO 1.0 MILE NORTH OF ROUTE 15 / 91 SEPARATION
Contractor Name: DYNALECTRIC
Contractor Address: 4462 Corporate Center Dr., Los Alamitos, CA 90720
Resident Engineer: Inderjeet Harika Structure Rep.: Vega, Arnel

Sample Information

DIME Sample ID: 2018-02-12-3
TL Number from the TL Form: 20180212
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 02/12/2018
Date that the sample was received by the laboratory/organization performing the testing: 02/14/2018
The quantity of what the sample constitutes: 4
A brief description of the sample: 6X12
From where was the sample collected: Job Site
Laboratory sample identification: 973-212
Structure unique identifier: STA F 1069 30
Structure name: Unknown
The fabricator/manufacturer/facility name: ROBERTSONS

Material Information

The concrete mix design number: SC590B38
The truck number from where the sample was collected: 1946
The batch plant ticket number from where the sample was collected: 3370914
Concrete batch plant: Unknown
The fabricator/manufacturer designation for the sample: Unknown
A detailed description of where the material sample was collected: TAIL
Where the material sample would have been placed if not sampled: Unknown
From Lot No.: Unknown
Bag Lot No.: Unknown

Test Results

Test 1 of 2

DIME Test ID: 2018-02-12-3-1
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Verified Date: 02/20/2018
Date Tested: 02/20/2018
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 2
Test performed With no density determined
Capped in accordance with? ASTM C617/CTM521
Average diameter of cylinder 1 6.02 in
Average diameter of cylinder 2 6.02 in
Cross sectional area of cylinder 1 28.46 in^2
Cross sectional area of cylinder 2 28.46 in^2
Compressive strength (to nearest 10 psi) 2480 psi
Maximum load on cylinder 1 69670 lb
Maximum load on cylinder 2 71440 lb
Compressive strength of cylinder 1 2448.0 psi
Type of fracture pattern of cylinder 1 3
Compressive strength of cylinder 2 2510.2 psi
Type of fracture pattern of cylinder 2 2
Comment on any defect in either specimen or caps (Max 250 Characters) no data
Correction factor for cylinder 1 1
Correction factor for cylinder 2 1
Age of specimen 8 days
Age of specimen in hours no data

Test 2 of 2

DIME Test ID: 2018-02-12-3-2
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Verified Date: 03/12/2018
Date Tested: 03/12/2018
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 2
Test performed With no density determined
Capped in accordance with? ASTM C617/CTM521
Average diameter of cylinder 1 6.01 in
Average diameter of cylinder 2 6.02 in
Cross sectional area of cylinder 1 28.37 in^2
Cross sectional area of cylinder 2 28.46 in^2
Compressive strength (to nearest 10 psi) 4130 psi
Maximum load on cylinder 1 119780 lb
Maximum load on cylinder 2 115070 lb
Compressive strength of cylinder 1 4222.1 psi
Type of fracture pattern of cylinder 1 3
Compressive strength of cylinder 2 4043.2 psi
Type of fracture pattern of cylinder 2 1
Comment on any defect in either specimen or caps (Max 250 Characters) no data
Correction factor for cylinder 1 1
Correction factor for cylinder 2 1
Age of specimen 28 days
Age of specimen in hours no data

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.