Print Report | Back to Sample Detail

Sample Record for 2018-02-15-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212795 DEA: 05937704 EFIS: 0514901244 Permit Numbers: 05176UB0132 QA Service Level: 1
DIST-CO-RTE-PM: 05-MON-68-4.04
Work Description: Install a water pipeline bridge including a 36 inch diameter steel casing
Location Description: County of Monterey
Contractor Name: Garney Construction Company
Contractor Address: 1110 Airport Rd, Monterey, CA 93940
Resident Engineer: Ignacio Saavedra Structure Rep.: David Galarza

Sample Information

DIME Sample ID: 2018-02-15-1
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Verification
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 02/15/2018
Date that the sample was received by the laboratory/organization performing the testing: 02/16/2018
The quantity of what the sample constitutes: 9
A brief description of the sample: 3/4 x 7 A325 HDG bolt
From where was the sample collected: Fabricator
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: UIS

Material Information

Rocap Number(s): none
Heat Number(s): 100884270
Nut Mfg. Lot Number(s): none
Washer Mfg. Lot Number(s): none
Bolt Specification: A325
Bolt Length(s): 7"
Nut Specification: none
Washer Specification: none
Finish: HDG
Diameter/Size: 3/4" x 7"
Bolt Mfg. Lot Number: SLSB, G9036
Rocap Test Requirement(s): none
Lubricant Requirements(s): none
Test results on following page(s): 7

Test Results

Test 1 of 7

DIME Test ID: 2018-02-15-1-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 02/22/2018
Date Tested: 02/22/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
1AG90363/4\"47751212.410A325Brian
UTM 400KIP
Temperature no data

Test 2 of 7

DIME Test ID: 2018-02-15-1-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 02/22/2018
Date Tested: 02/22/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number G9036
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 7 in
Gage Type Pass

Test 3 of 7

DIME Test ID: 2018-02-15-1-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 02/22/2018
Date Tested: 02/22/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number G9036
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 7 in
Gage Type Pass

Test 4 of 7

DIME Test ID: 2018-02-15-1-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 02/22/2018
Date Tested: 02/22/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number G9036
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 7 in
Gage Type Pass

Test 5 of 7

DIME Test ID: 2018-02-15-1-5
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/22/2018
Date Tested: 02/22/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number G9036
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 7 in
Measurement Average 4.04 mils

Test 6 of 7

DIME Test ID: 2018-02-15-1-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/22/2018
Date Tested: 02/22/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number G9036
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 7 in
Measurement Average 6.06 mils

Test 7 of 7

DIME Test ID: 2018-02-15-1-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 02/22/2018
Date Tested: 02/22/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number G9036
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .75 in
Bolt Length 7 in
Measurement Average 3.59 mils