Print Report | Back to Sample Detail

Sample Record for 2018-01-29-6

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212795 DEA: 05937704 EFIS: 0514901244 Permit Numbers: 05176UB0132 QA Service Level: 1
DIST-CO-RTE-PM: 05-MON-68-4.04
Work Description: Install a water pipeline bridge including a 36 inch diameter steel casing
Location Description: County of Monterey
Contractor Name: Garney Construction Company
Contractor Address: 1110 Airport Rd, Monterey, CA 93940
Resident Engineer: Ignacio Saavedra Structure Rep.: David Galarza

Sample Information

DIME Sample ID: 2018-01-29-6
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 01/29/2018
Date that the sample was received by the laboratory/organization performing the testing: 02/02/2018
The quantity of what the sample constitutes: 1
A brief description of the sample: Elastomeric Bearing Pad
From where was the sample collected: Manufacturer
Laboratory sample identification: 16202-1, 16202-2
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Scougal Rubber

Material Information

Mfg. Lot Number(s): 16202-1, 16202-2
Material/Compound/Elastomer ID: 2 527
Samples Representing: 16202 1
Description (size): 3 x 10 x 14
Comments: Unknown
Description (Number of Shims): 6
Type of Bearing Pad: Steel
Description (Thickness of Shims): 14 gage
Manufacturer(s): Scougal Rubber
Batch Number: Unknown
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2018-01-29-6-1
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 02/08/2018
Date Tested: 02/08/2018
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: sanchita.dey@dot.ca.gov
Organization Phone: (916) 227-7912
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Result Pass

Test 2 of 4

DIME Test ID: 2018-01-29-6-4
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 02/21/2018
Date Tested: 02/08/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
UTM no data
Humidity 50 %
Temperature 72 F
Sample 1 Median Thickness 0.075 in
Sample 1 Tear Strength 200 lbf / in
Sample 2 Median Thickness 0.08 in
Sample 2 Tear Strength 200 lbf / in
Sample 3 Median Thickness 0.088 in
Sample 3 Tear Strength 215.9 lbf / in
Median of the Tear Strength Values 200 lb/in

Test 3 of 4

DIME Test ID: 2018-01-29-6-5
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 02/21/2018
Date Tested: 02/09/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 5
Unit of the Ultimate Tensile Values lbf per sqr in
UTM 2KIP
Humidity 50 %
Temperature 72 F
Sample 1 Median Thickness 0.069 in
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 2254.3 lbf/in^2
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.067 in
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 2202.4 lbf/in^2
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.067 in
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 2261.9 lbf/in^2
Sample 3 Elongation (350% Min) Pass
Sample 4 Median Thickness 0.065 in
Sample 4 Thickness all Within 0.003 inch? Yes
Sample 4 Ultimate Tensile 2331.3 lbf/in^2
Sample 4 Elongation (350% Min) Pass
Sample 5 Median Thickness 0.067 in
Sample 5 Thickness all Within 0.003 inch? Yes
Sample 5 Ultimate Tensile 2440.5 lbf/in^2
Sample 5 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 2261.9 lbf/in^2

Test 4 of 4

DIME Test ID: 2018-01-29-6-6
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 02/21/2018
Date Tested: 02/07/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 51
Reading #2 50
Reading #3 51
Reading #4 51
Reading #5 52
Mean 51