Print Report | Back to Sample Detail

Sample Record for 2017-12-19-19

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 99999 DEA: 0322222 QA Service Level:
DIST-CO-RTE-PM: 03-SAC,OMG-888,99,80-0.6-0.6
Work Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Michael Maksimovich Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2017-12-19-19
TL Number from the TL Form: TL 326120
Sample Submitted By Organization: CT HQ - QAM Sacramento Field Laboratory
Sample Organization Contact: (916) 227-7266
Type of Sample: Quality Control
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 12/19/2017
Date that the sample was received by the laboratory/organization performing the testing: 12/19/2017
The quantity of what the sample constitutes: TEST Quantity
A brief description of the sample: TEST Asphalt Rubber Binder
From where was the sample collected: Other
Laboratory sample identification: Lab 326120
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: All American Asphalt

Material Information

Asphalt modifier supplier: All American Asphalt
Performance Grade:
Lot number:
Sublot number:
Asphalt Rubber Binder Mix Number:

Test Results

Test 1 of 4

DIME Test ID: 2017-12-19-19-1
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 12/20/2017
Date Tested: 12/20/2017
Submitted By Organization: CT HQ - QAM Sacramento Field Laboratory
Organization Address: 5900 Folsom Boulevard, MS 5,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brett.soldano@dot.ca.gov
Organization Phone: (562) 500-5861
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Determination Block Penetration
Block Penetration 39 0.1 mm
Minutes Reaction no data

Test 2 of 4

DIME Test ID: 2017-12-19-19-2
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 12/20/2017
Date Tested: 12/20/2017
Submitted By Organization: CT HQ - QAM Sacramento Field Laboratory
Organization Address: 5900 Folsom Boulevard, MS 5,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brett.soldano@dot.ca.gov
Organization Phone: (562) 500-5861
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Temperature no data
Final Dial reading (F1) no data
Ball Penetration (P1) no data
Final Dial reading (F2) no data
Ball Penetration (P2) no data
Final Dial reading (F3) no data
Ball Penetration (P3) no data
Resilience 1 no data
Resilience 2 no data
Resilience 3 no data
Average Resilience 36 %
Minutes Reaction no data

Test 3 of 4

DIME Test ID: 2017-12-19-19-3
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 12/20/2017
Date Tested: 12/20/2017
Submitted By Organization: CT HQ - QAM Sacramento Field Laboratory
Organization Address: 5900 Folsom Boulevard, MS 5,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brett.soldano@dot.ca.gov
Organization Phone: (562) 500-5861
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
ASTM Thermometer used? F
Softening Point Sample 1 142 F
Softening Point Sample 2 no data
Bath Liquid freshly boiled distilled water
Minutes Reaction no data

Test 4 of 4

DIME Test ID: 2017-12-19-19-4
Test Method: ASTM D7741-11ε1: Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer (Viscosity)
Verified Date: 12/20/2017
Date Tested: 12/20/2017
Submitted By Organization: CT HQ - QAM Sacramento Field Laboratory
Organization Address: 5900 Folsom Boulevard, MS 5,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brett.soldano@dot.ca.gov
Organization Phone: (562) 500-5861
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Test Temperature 125 F
Test 1 Viscosity 2000.0 Pa-s
Test 2 Viscosity 2400.0 Pa-s
Test 3 Viscosity 2600.0 Pa-s
Average Viscosity 2333.3 Pa-s
Minutes Reaction no data