Print Report | Back to Sample Detail

Sample Record for 2017-12-19-14

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 99999 DEA: 0322222 QA Service Level:
DIST-CO-RTE-PM: 03-SAC,OMG-888,99,80-0.6-0.6
Work Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2017-12-19-14
TL Number from the TL Form: TL 326120
Sample Submitted By Organization: CT QAM - Sacramento Field Laboratory
Sample Organization Contact: (916) 227-7266
Type of Sample: Quality Control
Type of Material: Hot Mix Asphalt
Sample Taken Date: 12/19/2017
Date that the sample was received by the laboratory/organization performing the testing: 12/19/2017
The quantity of what the sample constitutes: TEST Quantity
A brief description of the sample: HMA
From where was the sample collected: Other
Laboratory sample identification: Lab 326120
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Reliance - Irwindale

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number:
Sublot number:

Test Results

Test 1 of 6

DIME Test ID: 2017-12-19-14-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 12/19/2017
Date Tested: 12/19/2017
Submitted By Organization: CT QAM - Sacramento Field Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brett.soldano@dot.ca.gov
Organization Phone: (916) 227-7266
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Asphalt Binder Content 7.50 %
Correction Factor (Percent by mass of HMA Specimen) no data

Test 2 of 6

DIME Test ID: 2017-12-19-14-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 12/19/2017
Date Tested: 12/19/2017
Submitted By Organization: CT QAM - Sacramento Field Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brett.soldano@dot.ca.gov
Organization Phone: (916) 227-7266
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity 2.320
Bulk Specific Gravity 2 2.324
Bulk Specific Gravity 3 2.322
Average Bulk Specific Gravity 2.322

Test 3 of 6

DIME Test ID: 2017-12-19-14-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 12/19/2017
Date Tested: 12/19/2017
Submitted By Organization: CT QAM - Sacramento Field Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brett.soldano@dot.ca.gov
Organization Phone: (916) 227-7266
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Specific Gravity for Sample 1 2.419

Test 4 of 6

DIME Test ID: 2017-12-19-14-4
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 12/19/2017
Date Tested: 12/19/2017
Submitted By Organization: CT QAM - Sacramento Field Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brett.soldano@dot.ca.gov
Organization Phone: (916) 227-7266
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Average Dry Tensile Strength 122 psi
Average Wet Tensile Strength 96 psi
Tensile Strength Ratio 1.27

Test 5 of 6

DIME Test ID: 2017-12-19-14-5
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 12/19/2017
Date Tested: 12/19/2017
Submitted By Organization: CT QAM - Sacramento Field Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brett.soldano@dot.ca.gov
Organization Phone: (916) 227-7266
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Percent Air Voids 4.1 %
Percent Air Voids 2 3.9 %
Percent Air Voids 3 4.0 %
Percent Air Voids Average 4.0 %

Test 6 of 6

DIME Test ID: 2017-12-19-14-6
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 12/20/2017
Date Tested: 12/19/2017
Submitted By Organization: CT QAM - Sacramento Field Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brett.soldano@dot.ca.gov
Organization Phone: (916) 227-7266
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Average Dry Tensile Strength 122 psi
Average Wet Tensile Strength 96 psi
Tensile Strength Ratio 0.79

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.