Print Report | Back to Sample Detail

Sample Record for 2017-12-13-27

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212854 DEA: 07342101 EFIS: 0717000244 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-5-27.0/66.5
Work Description: Establish standard vertical clearance.
Location Description: In Los Angeles County, at various locations.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2017-12-13-27
TL Number from the TL Form: C939201
Sample Submitted By Organization: CT - Unassigned/General Field Laboratory
Sample Organization Contact: 5625005861
Type of Sample: Informational
Type of Material: SMTL TM6 - Steel Check Sample Plate
Sample Taken Date: 12/13/2017
Date that the sample was received by the laboratory/organization performing the testing: 12/19/2017
The quantity of what the sample constitutes: 3
A brief description of the sample: 8x12 Steel Plate
From where was the sample collected: Job Site
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Collected at jobsite

Material Information

Heat Number(s): Unknown
Material Specification: A572
Grade: Unknown
Thickness: .375 .5
Shape: Plate
Metal Foundry Manufacturer (Mill): Unknown
Plate Dimension: 8x12
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2017-12-13-27-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Flat Sample)
Verified Date: 01/03/2018
Date Tested: 12/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 6
SampleHeat NumberWidth (in)Area (sqin)Stress at Offset (psi)Tensile Strength (psi)Total Elongation (%)Tested By
N/A0.4970.2565401196755238.2Fred
N/A0.4980.257408886733938.2Fred
N/A0.4980.1897424306521938.3Fred
N/A0.4980.1897423206479238.3Fred
N/A0.4980.187762216604739Fred
N/A0.4980.1877416366597836.7Fred
UTM 67KIP
Temperature 72 F

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2017-12-13-27-2ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)01/02/201801/02/2018Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory