Project Information

Project ID: 99999 DEA: 0322222 QA Service Level:

DIST-CO-RTE-PM: 03-SAC,OMG-888,99,80-0.6-0.6

Work Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.

Location Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.

Contractor Name: Unknown

Contractor Address: Unknown

Resident Engineer: Michael Maksimovich Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2017-11-01-22

TL Number from the TL Form:

Sample Submitted By Organization: CT HQ - Sacramento Materials Management Branch Field Office

Sample Organization Contact: (562) 500-5861

Type of Sample: Quality Control

Type of Material: Reclaimed Asphalt Pavement

Sample Taken Date: 11/01/2017

Date that the sample was received by the laboratory/organization performing the testing:

The quantity of what the sample constitutes: 1

A brief description of the sample: RAP ignition 2

From where was the sample collected: Source

Laboratory sample identification:

Structure unique identifier:

Structure name:

The fabricator/manufacturer/facility name: Test

Material Information

RAP Source: Mustang Pit

Aggregate Size:

Aggregate Source:

RAP Stockpile:

Stockpile Size (tons):

Reclaimed Asphalt Pavement Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2017-11-01-22-1

Test Method: AASHTO T30-15: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)

Verified Date: 11/03/2017

Date Tested: 11/03/2017

Submitted By Organization: CT HQ - Sacramento Materials Management Branch Field Office

Organization Address: 5900 Folsom Boulevard, MS 5,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: brett.soldano@dot.ca.gov

Organization Phone: (562) 500-5861

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Cumulative percent passing the 2 in. sieve	no data
Cumulative percent passing the 1 1/2 in. sieve	100 %
Cumulative percent passing the 1 in. sieve	100 %
Cumulative percent passing the 3/4 in. sieve	100 %
Cumulative percent passing the 1/2 in. sieve	100 %
Cumulative percent passing the 3/8 in. sieve	94.7 %
Cumulative percent passing the 1/4 in. sieve	68.1 %
Cumulative percent passing the #4 sieve	49.2 %
Cumulative percent passing the #8 sieve	45.6 %
Cumulative percent passing the #16 sieve	37.3 %
Cumulative percent passing the #30 sieve	29 %
Cumulative percent passing the #50 sieve	21.5 %
Cumulative percent passing the #100 sieve	15.3 %
Cumulative percent passing the #200 sieve	10.8 %

Test 2 of 2

DIME Test ID: 2017-11-01-22-2

Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)