Sample Record for 2017-09-11-2
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 211716 DEA: 101C4214 EFIS: 1015000131
QA Service Level: 1
DIST-CO-RTE-PM: 10-SJ-99-14.3/14.9,18.4/23.0
Work Description: RAMP WIDENING, INSTALL RAMP METERING AND FIBER OPTIC CABLE.
Location Description: SAN JOAQUIN COUNTY IN STOCKTON FROM 0.3 MILE SOUTH TO 0.3 MILE NORTH OF ARCH ROAD UNDERCROSSING AND FROM 0.3 MILE NORTH OF MAIN STREET OVERCROSSING TO 0.1 MILE NORTH OF HAMMER LANE OVERCROSSING
Contractor Name: Bay Cities Paving & Grading
Contractor Address: 1450 Civic Ct. BLDG B #400, Concord CA, 94520
Resident Engineer: Abdul (Obaidullah) Rashid Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2017-09-11-2
TL Number from the TL Form: C741515
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM5 - Welded Hoops
Sample Taken Date: 09/11/2017
Date that the sample was received by the laboratory/organization performing the testing: 09/12/2017
The quantity of what the sample constitutes: 4
A brief description of the sample: 4 Flash Welded hoops
From where was the sample collected: Manufacturer
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Harris Rebar
Material Information
Production or Authorization Testing: Production Testing
Service or Ultimate: Ultimate
Rebar Heat Number(s): SE13106226
Hoop Manufacturer Lot Number(s): H01
Material Standard Code: ASTM A706
Material Grade: 60
Rebar Size: 4
Diameter of Hoop: 2'-2"
Epoxy Coated: No
Epoxy Coating Color: NA
Rebar Manufacturer: Nucor
Welding Company: Harris Rebar
Coating Standards: Uncoated
Weld Type: Flash Welded
Test Results
Test 1 of 3
DIME Test ID: 2017-09-11-2-1
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)
Verified Date: 09/13/2017
Date Tested: 09/12/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: necking okay
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By | | 1 | H01 | #4/13mm | 0.2 | 19610 | 98050 | necking okay | Fred |
| |
|
UTM
|
75KIP
|
|
Temperature
|
72 F
|
Test 2 of 3
DIME Test ID: 2017-09-11-2-2
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)
Verified Date: 09/13/2017
Date Tested: 09/12/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: necking okay
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By | | 2 | H01 | #4/13mm | 0.2 | 19310 | 96550 | necking okay | Fred |
| |
|
UTM
|
75KIP
|
|
Temperature
|
72 F
|
Test 3 of 3
DIME Test ID: 2017-09-11-2-3
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)
Verified Date: 09/13/2017
Date Tested: 09/12/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: necking okay
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By | | 3 | H01 | #4/13mm | 0.2 | 19639 | 98190 | necking okay | Fred |
| |
|
UTM
|
75KIP
|
|
Temperature
|
72 F
|
