Print Report | Back to Sample Detail

Sample Record for 2017-08-23-13

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212011 DEA: 07252624 EFIS: 0700021272 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-5-R45.4/R61.2
Work Description: REHABILITATE CONCRETE PAVEMENT.
Location Description: LOS ANGELES COUNTY IN LOS ANGELES AND AT CASTAIC FROM 0.2 MILE SOUTH OF ROUTE 14/5 SEPARATION TO 0.7 MILE NORTH OF PALOMAS WASH BRIDGE
Contractor Name: Guy F. Atkinson
Contractor Address: 18201 Von Karman Ave, Suite #800, IRVINE CA 92612
Resident Engineer: Daniel Widjaja Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2017-08-23-13
TL Number from the TL Form: 914174
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Quality Assurance
Type of Material: Concrete
Sample Taken Date: 08/23/2017
Date that the sample was received by the laboratory/organization performing the testing: 08/23/2017
The quantity of what the sample constitutes: 6
A brief description of the sample: 6 x 12 LCB Cylinder
From where was the sample collected: Job Site
Laboratory sample identification: 965-74
Structure unique identifier: Unknown
Structure name: Unknown
The fabricator/manufacturer/facility name: CALPORTLAND

Material Information

The concrete mix design number: LB17-0048
The truck number from where the sample was collected: NOT PROVIDED
The batch plant ticket number from where the sample was collected: NOT PROVIDED
Concrete batch plant: Unknown
The fabricator/manufacturer designation for the sample: PLANT
A detailed description of where the material sample was collected: SKIPLOADER TO WHEELBARROW
Where the material sample would have been placed if not sampled: ATKINSON PORTABLE PLANT I 5 CALGROVE
From Lot No.: Unknown
Bag Lot No.: Unknown

Test Results

Test 1 of 1

DIME Test ID: 2017-08-23-13-1
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Verified Date: 08/30/2017
Date Tested: 08/30/2017
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 6
Test performed With no density determined
Capped in accordance with? ASTM C617/CTM521
Average diameter of cylinder 1 6.01 in
Average diameter of cylinder 2 5.99 in
Average diameter of cylinder 3 6.01 in
Average diameter of cylinder 4 6.00 in
Average diameter of cylinder 5 6.00 in
Average diameter of cylinder 6 6.00 in
Cross sectional area of cylinder 1 28.37 in^2
Cross sectional area of cylinder 2 28.18 in^2
Cross sectional area of cylinder 3 28.37 in^2
Cross sectional area of cylinder 4 28.27 in^2
Cross sectional area of cylinder 5 28.27 in^2
Cross sectional area of cylinder 6 28.27 in^2
Compressive strength (to nearest 10 psi) 850 psi
Maximum load on cylinder 1 25710 lb
Maximum load on cylinder 2 24610 lb
Maximum load on cylinder 3 23780 lb
Maximum load on cylinder 4 23190 lb
Maximum load on cylinder 5 23450 lb
Maximum load on cylinder 6 23460 lb
Compressive strength of cylinder 1 906.2 psi
Type of fracture pattern of cylinder 1 1
Compressive strength of cylinder 2 873.3 psi
Compressive strength of cylinder 3 838.2 psi
Compressive strength of cylinder 4 820.3 psi
Compressive strength of cylinder 5 829.5 psi
Compressive strength of cylinder 6 829.9 psi
Type of fracture pattern of cylinder 2 3
Type of fracture pattern of cylinder 3 1
Type of fracture pattern of cylinder 4 4
Type of fracture pattern of cylinder 5 2
Type of fracture pattern of cylinder 6 2
Comment on any defect in either specimen or caps (Max 250 Characters) no data
Correction factor for cylinder 1 1
Correction factor for cylinder 2 no data
Correction factor for cylinder 3 no data
Correction factor for cylinder 4 no data
Correction factor for cylinder 5 no data
Correction factor for cylinder 6 no data
Age of specimen 7 days
Age of specimen in hours no data

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.