Print Report | Back to Sample Detail

Sample Record for 2017-07-27-11

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 211671 DEA: 07281504 EFIS: 0700000552 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA,VEN-101-29.3/38.2,0.0/1.2
Work Description: CONSTRUCT STORM WATER TREATMENT SYSTEMS.
Location Description: LOS ANGELES AND VENTURA COUNTIES AT VARIOUS LOCATIONS
Contractor Name: C.A. Rasmussen Inc
Contractor Address: 28548 Livingston Ave, Valencia, CA 91355
Resident Engineer: VENKATARAMAN KALYANAKRISHNAN Structure Rep.: Ray Ranjkesh

Sample Information

DIME Sample ID: 2017-07-27-11
TL Number from the TL Form: 193658
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 07/27/2017
Date that the sample was received by the laboratory/organization performing the testing: 08/03/2017
The quantity of what the sample constitutes: 2
A brief description of the sample: 6x12
From where was the sample collected: Job Site
Laboratory sample identification: 960-58
Structure unique identifier: location 28 austin vault
Structure name: Unknown
The fabricator/manufacturer/facility name: np

Material Information

The concrete mix design number: np
The truck number from where the sample was collected: Unknown
The batch plant ticket number from where the sample was collected: np
Concrete batch plant: Unknown
The fabricator/manufacturer designation for the sample: Unknown
A detailed description of where the material sample was collected: load 2
Where the material sample would have been placed if not sampled: Unknown
From Lot No.: Unknown
Bag Lot No.: Unknown

Test Results

Test 1 of 1

DIME Test ID: 2017-07-27-11-1
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Verified Date: 08/17/2017
Date Tested: 08/17/2017
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 2
Test performed With no density determined
Capped in accordance with? ASTM C617/CTM521
Average diameter of cylinder 1 6.00 in
Average diameter of cylinder 2 6.02 in
Cross sectional area of cylinder 1 28.27 in^2
Cross sectional area of cylinder 2 28.46 in^2
Compressive strength (to nearest 10 psi) 3740 psi
Maximum load on cylinder 1 107260 lb
Maximum load on cylinder 2 104770 lb
Compressive strength of cylinder 1 3794.1 psi
Type of fracture pattern of cylinder 1 1
Compressive strength of cylinder 2 3681.3 psi
Type of fracture pattern of cylinder 2 2
Comment on any defect in either specimen or caps (Max 250 Characters) no data
Correction factor for cylinder 1 1
Correction factor for cylinder 2 no data
Age of specimen 21 days
Age of specimen in hours no data