Print Report | Back to Sample Detail

Sample Record for 2017-07-25-5

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 210696 DEA: 080M2804 EFIS: 0800000472 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-15-171.8/173.8
Work Description: BRIDGE REPLACEMENT AND WIDEN, CONC AND HMA PVMT, COLD PLANE AC PVMT.
Location Description: In SBD County
Contractor Name: M.C.M. CONSTRUCTION, INC. - Dan Shaw
Contractor Address: P.O. Box 620, North Highlands, CA 95660
Resident Engineer: John Santos Structure Rep.: Faisal Zahlout

Sample Information

DIME Sample ID: 2017-07-25-5
TL Number from the TL Form: C719143 and C719144
Sample Submitted By Organization: CT QASI - Bay Area Field Laboratory
Sample Organization Contact: (707) 649-5453
Type of Sample: Verification
Type of Material: SMTL TM7 - Epoxy Coated Rebar
Sample Taken Date: 07/25/2017
Date that the sample was received by the laboratory/organization performing the testing: 07/25/2017
The quantity of what the sample constitutes: 2 truck loads
A brief description of the sample: 4,5,6,11 Epoxy coated rebar
From where was the sample collected: Fabricator
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Western Coating

Material Information

Rebar Heat Number(s): 4067224,4067179,PL16103008,PL16206289,4062485,PL16108827,PL16209030,
Rebar Epoxy Batch Number(s): TD95852NA,3395643,3416421,3395649,3416423
Rebar Coating Specification: ASTM A775
Rebar Size (#): 4,5,6,11
Rebar Coating Color: Green
Rebar Manufacturer: Nucor,Gerdau
Rebar Coater: Western Coating
Rebar Powder Manufacturer: Axalta
Release Number: 36172 and C36173
Quality Assurance Code: Unknown

Test Results

Test 1 of 12

DIME Test ID: 2017-07-25-5-1
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 07/31/2017
Date Tested: 07/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: #4/13mm Rebar
Test Result Compliance:
Additional Comments When Verified:
First Bar Mean 8.41 mils
Second Bar Mean 8.29 mils
Lower spec. limit LSL 7 mils
Upper spec. limit USL 12 mils
Bar # for First Bar no data
Bar # for Second Bar no data
Total mean value 8.35 mils
Total number of values less than LSL no data
Total number of values greater than USL no data

Test 2 of 12

DIME Test ID: 2017-07-25-5-2
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 07/31/2017
Date Tested: 07/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: #5/16mm Rebar
Test Result Compliance:
Additional Comments When Verified:
First Bar Mean 7.7 mils
Second Bar Mean 8.21 mils
Lower spec. limit LSL 7 mils
Upper spec. limit USL 12 mils
Bar # for First Bar no data
Bar # for Second Bar no data
Total mean value 7.95 mils
Total number of values less than LSL no data
Total number of values greater than USL no data

Test 3 of 12

DIME Test ID: 2017-07-25-5-3
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 07/31/2017
Date Tested: 07/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: #6/19mm Rebar
Test Result Compliance:
Additional Comments When Verified:
First Bar Mean 9.7 mils
Second Bar Mean 9.67 mils
Lower spec. limit LSL 7 mils
Upper spec. limit USL 16 mils
Bar # for First Bar no data
Bar # for Second Bar no data
Total mean value 9.69 mils
Total number of values less than LSL no data
Total number of values greater than USL no data

Test 4 of 12

DIME Test ID: 2017-07-25-5-4
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 07/31/2017
Date Tested: 07/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: #11/36mm Rebar
Test Result Compliance:
Additional Comments When Verified:
First Bar Mean 10.62 mils
Second Bar Mean 10.59 mils
Lower spec. limit LSL 7 mils
Upper spec. limit USL 16 mils
Bar # for First Bar no data
Bar # for Second Bar no data
Total mean value 10.6 mils
Total number of values less than LSL no data
Total number of values greater than USL no data

Test 5 of 12

DIME Test ID: 2017-07-25-5-5
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Holiday)
Verified Date: 07/31/2017
Date Tested: 07/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: #4/13mm Rebar
Test Result Compliance:
Additional Comments When Verified:
Total Number of Holiday 1
Total Length 2.6 ft
Holidays Per Linear Foot of Bar 0.4 holiday pe
Holiday Test Pass/Fail Pass
Bend Test Pass/Fail Pass

Test 6 of 12

DIME Test ID: 2017-07-25-5-6
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Holiday)
Verified Date: 07/31/2017
Date Tested: 07/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: #5/16mm Rebar
Test Result Compliance:
Additional Comments When Verified:
Total Number of Holiday 0
Total Length 2.6 ft
Holidays Per Linear Foot of Bar 0 holiday pe
Holiday Test Pass/Fail Pass
Bend Test Pass/Fail Pass

Test 7 of 12

DIME Test ID: 2017-07-25-5-7
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Holiday)
Verified Date: 07/31/2017
Date Tested: 07/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: #6/19mm Rebar
Test Result Compliance:
Additional Comments When Verified:
Total Number of Holiday 0
Total Length 2.6 ft
Holidays Per Linear Foot of Bar 0 holiday pe
Holiday Test Pass/Fail Pass
Bend Test Pass/Fail Pass

Test 8 of 12

DIME Test ID: 2017-07-25-5-8
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Holiday)
Verified Date: 07/31/2017
Date Tested: 07/28/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: #11/36mm Rebar
Test Result Compliance:
Additional Comments When Verified:
Total Number of Holiday 3
Total Length 2.6 ft
Holidays Per Linear Foot of Bar 1.2 holiday pe
Holiday Test Pass/Fail Pass
Bend Test Pass/Fail Pass

Test 9 of 12

DIME Test ID: 2017-07-25-5-9
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 07/31/2017
Date Tested: 07/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: #5/16mm Rebar, C719143
Test Result Compliance:
Additional Comments When Verified:
First Bar Mean 9.91 mils
Second Bar Mean 9.95 mils
Lower spec. limit LSL 7 mils
Upper spec. limit USL 12 mils
Bar # for First Bar no data
Bar # for Second Bar no data
Total mean value 9.93 mils
Total number of values less than LSL no data
Total number of values greater than USL no data

Test 10 of 12

DIME Test ID: 2017-07-25-5-10
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 07/31/2017
Date Tested: 07/28/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: #11/36mm Rebar, C719143
Test Result Compliance:
Additional Comments When Verified:
First Bar Mean 8.82 mils
Second Bar Mean 9 mils
Lower spec. limit LSL 7 mils
Upper spec. limit USL 16 mils
Bar # for First Bar no data
Bar # for Second Bar no data
Total mean value 8.91 mils
Total number of values less than LSL no data
Total number of values greater than USL no data

Test 11 of 12

DIME Test ID: 2017-07-25-5-11
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Holiday)
Verified Date: 07/31/2017
Date Tested: 07/28/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: #5/16mm Rebar
Test Result Compliance:
Additional Comments When Verified:
Total Number of Holiday 0
Total Length 2.6 ft
Holidays Per Linear Foot of Bar 0 holiday pe
Holiday Test Pass/Fail Pass
Bend Test Pass/Fail Pass

Test 12 of 12

DIME Test ID: 2017-07-25-5-12
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Holiday)
Verified Date: 07/31/2017
Date Tested: 07/28/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: #11/36mm Rebar
Test Result Compliance:
Additional Comments When Verified:
Total Number of Holiday 0
Total Length 2.6 ft
Holidays Per Linear Foot of Bar 0 holiday pe
Holiday Test Pass/Fail Pass
Bend Test Pass/Fail Pass

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.