Sample Record for 2017-06-22-3
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 211768 DEA: 043K1104 EFIS: 0417000079
QA Service Level: 1
DIST-CO-RTE-PM: 04-SF-80-8.3, 8.30
Work Description: Replace SAS tower anchor rod grout
Location Description: Bay Bridge
Contractor Name: CALIFORNIA ENGINEERING CONTRACTORS, INC.
Contractor Address: 20 HAPPY VALLEY ROAD, PLEASANTON CA 94566
Resident Engineer: Roberto Borja Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2017-06-22-3
TL Number from the TL Form: C719183
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Acceptance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 06/22/2017
Date that the sample was received by the laboratory/organization performing the testing: 06/26/2017
The quantity of what the sample constitutes: 67
A brief description of the sample: A325 MG Rocap Assembiy
From where was the sample collected: Distributor
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: LeJeune Bolt Company
Material Information
Rocap Number(s): L1412183
Heat Number(s): 10379920
Nut Mfg. Lot Number(s): Unytite
Washer Mfg. Lot Number(s): 24555-6214189902
Bolt Specification: A325
Bolt Length(s): 3-1/4"
Nut Specification: A563 DH
Washer Specification: F436
Finish: MG
Diameter/Size: 3/4"
Bolt Mfg. Lot Number: 752641
Rocap Test Requirement(s): F3125
Lubricant Requirements(s): Yes
Test Results
Test 1 of 17
DIME Test ID: 2017-06-22-3-1
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
752641Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 USA LE
|
Size
|
0.75 in
|
Bolt Length
|
3.25 in
|
Gage Type
|
Pass
|
Test 2 of 17
DIME Test ID: 2017-06-22-3-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
752641Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 USA LE
|
Size
|
0.75 in
|
Bolt Length
|
3.25 in
|
Gage Type
|
Pass
|
Test 3 of 17
DIME Test ID: 2017-06-22-3-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
752641Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 USA LE
|
Size
|
0.75 in
|
Bolt Length
|
3.25 in
|
Gage Type
|
Pass
|
Test 4 of 17
DIME Test ID: 2017-06-22-3-4
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
752641Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 USA LE
|
Size
|
0.75 in
|
Bolt Length
|
3.25 in
|
Measurement Average
|
4.24 mils
|
Test 5 of 17
DIME Test ID: 2017-06-22-3-5
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
752641Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 USA LE
|
Size
|
0.75 in
|
Bolt Length
|
3.25 in
|
Measurement Average
|
2.88 mils
|
Test 6 of 17
DIME Test ID: 2017-06-22-3-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
752641Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 USA LE
|
Size
|
0.75 in
|
Bolt Length
|
3.25 in
|
Measurement Average
|
3.39 mils
|
Test 7 of 17
DIME Test ID: 2017-06-22-3-7
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
752641Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 USA LE
|
Size
|
0.75 in
|
Bolt Length
|
3.25 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
30.02
|
Spacing
|
Ok
|
Test 8 of 17
DIME Test ID: 2017-06-22-3-8
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
752641Z
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 USA LE
|
Size
|
0.75 in
|
Bolt Length
|
3.25 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
30.7
|
Spacing
|
Ok
|
Test 9 of 17
DIME Test ID: 2017-06-22-3-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
24555-6214189902
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
DH U
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Measurement Average
|
2.02 mils
|
Test 10 of 17
DIME Test ID: 2017-06-22-3-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
24555-6214189902
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
DH U
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Measurement Average
|
2.3 mils
|
Test 11 of 17
DIME Test ID: 2017-06-22-3-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
24555-6214189902
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
DH U
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.42 mils
|
Test 12 of 17
DIME Test ID: 2017-06-22-3-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
D2967
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 P
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.91 mils
|
Test 13 of 17
DIME Test ID: 2017-06-22-3-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
D2967
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 P
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.92 mils
|
Test 14 of 17
DIME Test ID: 2017-06-22-3-14
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
D2967
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 P
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.82 mils
|
Test 15 of 17
DIME Test ID: 2017-06-22-3-15
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
D2967
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 P
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
40.9
|
Spacing
|
Ok
|
Test 16 of 17
DIME Test ID: 2017-06-22-3-16
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
L1412183
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
D2967
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 P
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
42.45
|
Spacing
|
Ok
|
Test 17 of 17
DIME Test ID: 2017-06-22-3-17
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 06/27/2017
Date Tested: 06/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | 1A | 24555 | ?\" | 50620 | 225.17 | Nut Proof Load | Fred |
| |
UTM
|
400KIP
|
Temperature
|
72 F
|