Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 211162 DEA: 044G4504 EFIS: 0412000477
QA Service Level: 1
DIST-CO-RTE-PM: 04-SOL-780-7.07
Work Description: REPLACE BRIDGE TO PROVIDE STANDARD VERTICAL CLEARANCE
Location Description: LAUREL STREET OC
Contractor Name: R N R CONSTRUCTION, INC.
Contractor Address: 8589 Thys Court, Sacramento, CA 95828
Resident Engineer: Jolie Schneider Structure Rep.: Joe De La Torre
DIME Sample ID: 2017-06-21-3
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Department Acceptance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 06/21/2017
Date that the sample was received by the laboratory/organization performing the testing: 06/29/2017
The quantity of what the sample constitutes: 11
A brief description of the sample: 12x18x2
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Scougal Rubber
Mfg. Lot Number(s): 15692
Material/Compound/Elastomer ID: Cp2527vcp2628ars703055duro
Samples Representing: 11
Description (size): 18x12x2
Comments:
Description (Number of Shims): 4
Type of Bearing Pad: Steel
Description (Thickness of Shims): 14 gage
Manufacturer(s): Scougal
Batch Number: 15692
DIME Test ID: 2017-06-21-3-1
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 07/06/2017
Date Tested: 06/30/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Temperature
|
72 f
|
|
Humidity
|
50 %
|
|
Reading #1
|
54
|
|
Reading #2
|
54
|
|
Reading #3
|
53
|
|
Reading #4
|
54
|
|
Reading #5
|
53
|
|
Mean
|
53.6
|
DIME Test ID: 2017-06-21-3-2
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 07/06/2017
Date Tested: 06/30/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of specimens tested
|
3
|
|
Unit of the Ultimate Tensile Values
|
lbf per sqr in
|
|
UTM
|
2KIP
|
|
Humidity
|
50 %
|
|
Temperature
|
72 F
|
|
Sample 1 Median Thickness
|
0.071 in
|
|
Sample 1 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 1 Ultimate Tensile
|
3258.4 lbf/in^2
|
|
Sample 1 Elongation (350% Min)
|
Pass
|
|
Sample 2 Median Thickness
|
0.076 in
|
|
Sample 2 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 2 Ultimate Tensile
|
2947.4 lbf/in^2
|
|
Sample 2 Elongation (350% Min)
|
Pass
|
|
Sample 3 Median Thickness
|
0.071 in
|
|
Sample 3 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 3 Ultimate Tensile
|
3146.1 lbf/in^2
|
|
Sample 3 Elongation (350% Min)
|
Pass
|
|
Median of the Ultimate Tensile Values
|
3146.1 lbf/in^2
|
DIME Test ID: 2017-06-21-3-3
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 07/06/2017
Date Tested: 06/30/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of specimens tested
|
3
|
|
UTM
|
no data
|
|
Humidity
|
50 %
|
|
Temperature
|
72 F
|
|
Sample 1 Median Thickness
|
0.072 in
|
|
Sample 1 Tear Strength
|
222.2 lbf / in
|
|
Sample 2 Median Thickness
|
0.067 in
|
|
Sample 2 Tear Strength
|
283.6 lbf / in
|
|
Sample 3 Median Thickness
|
0.068 in
|
|
Sample 3 Tear Strength
|
279.4 lbf / in
|
|
Median of the Tear Strength Values
|
279.4 lb/in
|
DIME Test ID: 2017-06-21-3-4
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 07/06/2017
Date Tested: 07/06/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
