Print Report | Back to Sample Detail

Sample Record for 2017-06-15-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 7613 DEA: 071218W4 EFIS: 0700021119 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-5-29.4/31.6
Work Description: REALIGN ROUTE 5 AND RAILROAD TRACKS AND RECONFIGURE ON- AND OFF-RAMPS.
Location Description: LOS ANGELES COUNTY IN BURBANK FROM WEST MAGNOLIA BOULEVARD OVERCROSSING TO 0.3 MILE NORTH OF BUENA VISTA STREET/WINONA AVENUE UNDERCROSSING
Contractor Name: SECURITY PAVING COMPANY, INC.
Contractor Address: 13170 TELFAIR AVENUE, SYLMAR, CA 91342
Resident Engineer: Vladimir Gurfinkel Structure Rep.: Gon Choi

Sample Information

DIME Sample ID: 2017-06-15-4
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: 760-518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 06/15/2017
Date that the sample was received by the laboratory/organization performing the testing: 06/15/2017
The quantity of what the sample constitutes: 2 tankers
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik bond and Reichhold

Material Information

Mfg. Lot Number(s): 1057687
Batch number: 1057687
Mix number: 1057687

Test Results

Test 1 of 1

DIME Test ID: 2017-06-15-4-1
Test Method: CONCLP 3-16: Polyester Resin
Verified Date: 07/10/2017
Date Tested: 07/10/2017
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: accepted suppliers bond Q.C. results our press is down
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F 97 cps
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F 1.07
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35% 53.9 %
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi 2676 psi
Styrene ASTM D 2369 40% to 50 % 46 %
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours 602 psi
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams 0.6 grams

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.