Print Report | Back to Sample Detail

Sample Record for 2017-05-24-6

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212164 DEA: 051J1304 EFIS: 0517000064 QA Service Level: 1
DIST-CO-RTE-PM: 05-MON,MON-1-45.52, 45.4/45.8
Work Description: Pfeiffer Canyon Emergency Bridge Replacement Project
Location Description: Highway 1 at Pfeiffer State Park
Contractor Name: Golden State Bridge
Contractor Address: 2990 Bay Vista Court, Benicia, CA 94510
Resident Engineer: Tyler Lavering Structure Rep.: David Galarza

Sample Information

DIME Sample ID: 2017-05-24-6
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 05/24/2017
Date that the sample was received by the laboratory/organization performing the testing: 05/31/2017
The quantity of what the sample constitutes: 141
A brief description of the sample: A325 HDG Rocap Assembiy
From where was the sample collected: Manufacturer
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: St Louis Screw Bolt

Material Information

Rocap Number(s): TT0085221 TT0085224 TT0085225 TT0085226 TT0085203 TT0085228 TT0085229 TT0085230 TT0085231 TT0085232 TT0085233 TT0085234 TT0085236
Heat Number(s):
Nut Mfg. Lot Number(s): 25305-166976 23840-75063408
Washer Mfg. Lot Number(s): D3402 D3289
Bolt Specification: A325
Bolt Length(s): 3.25" 4.25" 4.75" 5.5" 6" 7.5" 8.75" 1
Nut Specification: A563
Washer Specification: F436
Finish: HDG
Diameter/Size: 1" 0.875"
Bolt Mfg. Lot Number: BG0861 BG0753 BG0697 BG0565 041972/G8842
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 182

DIME Test ID: 2017-05-24-6-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
1AB07374171\"88811395.110A325Fred
UTM 400KIP
Temperature no data

Test 2 of 182

DIME Test ID: 2017-05-24-6-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
1BB07374171\"88964395.710A325Fred
UTM 400KIP
Temperature no data

Test 3 of 182

DIME Test ID: 2017-05-24-6-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
2AB07374171\"88419393.310A325Fred
UTM 400KIP
Temperature no data

Test 4 of 182

DIME Test ID: 2017-05-24-6-4
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
3AB07374171\"83272370.410A325Fred
UTM 400KIP
Temperature no data

Test 5 of 182

DIME Test ID: 2017-05-24-6-5
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
3BB07374171\"84034373.810A325Fred
UTM 400KIP
Temperature no data

Test 6 of 182

DIME Test ID: 2017-05-24-6-6
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
4AB07374171\"84965377.910A325Fred
UTM 400KIP
Temperature no data

Test 7 of 182

DIME Test ID: 2017-05-24-6-7
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
4BB07374171\"84938377.810A325Fred
UTM 400KIP
Temperature no data

Test 8 of 182

DIME Test ID: 2017-05-24-6-8
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
5AB07374171\"82887368.710A325Fred
UTM 400KIP
Temperature no data

Test 9 of 182

DIME Test ID: 2017-05-24-6-9
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
6AB07374171\"83094369.610A325Fred
UTM 400KIP
Temperature no data

Test 10 of 182

DIME Test ID: 2017-05-24-6-10
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
6BB07374171\"84559376.110A325Fred
UTM 400KIP
Temperature no data

Test 11 of 182

DIME Test ID: 2017-05-24-6-11
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
7AB07374171\"84259374.810A325Fred
UTM 400KIP
Temperature no data

Test 12 of 182

DIME Test ID: 2017-05-24-6-12
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
7BB07374171\"84592376.310A325Fred
UTM 400KIP
Temperature no data

Test 13 of 182

DIME Test ID: 2017-05-24-6-13
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
8AB07374171\"8429637510A325Fred
UTM 400KIP
Temperature no data

Test 14 of 182

DIME Test ID: 2017-05-24-6-14
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
8BB07374171\"85029378.210A325Fred
UTM 400KIP
Temperature no data

Test 15 of 182

DIME Test ID: 2017-05-24-6-15
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
9AB07374171\"86854386.310A325Fred
UTM 400KIP
Temperature no data

Test 16 of 182

DIME Test ID: 2017-05-24-6-16
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
9BB07374171\"86410384.410A325Fred
UTM 400KIP
Temperature no data

Test 17 of 182

DIME Test ID: 2017-05-24-6-17
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
10AB07374171\"84601376.310A325Fred
UTM 400KIP
Temperature no data

Test 18 of 182

DIME Test ID: 2017-05-24-6-18
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
10BB07374171\"86195383.410A325Fred
UTM 400KIP
Temperature no data

Test 19 of 182

DIME Test ID: 2017-05-24-6-19
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
11AB07374171\"85710381.310A325Fred
UTM 400KIP
Temperature no data

Test 20 of 182

DIME Test ID: 2017-05-24-6-20
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
11BB07374171\"85990382.510A325Fred
UTM 400KIP
Temperature no data

Test 21 of 182

DIME Test ID: 2017-05-24-6-21
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
12AB07374177/8\"6676529710A325Fred
UTM 400KIP
Temperature no data

Test 22 of 182

DIME Test ID: 2017-05-24-6-22
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
13AB07374177/8\"65583291.710A325Fred
UTM 400KIP
Temperature no data

Test 23 of 182

DIME Test ID: 2017-05-24-6-23
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1AB07374171\"93508415.94Proof LoadFred
UTM 400KIP
Temperature 72 F

Test 24 of 182

DIME Test ID: 2017-05-24-6-24
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1BB07374171\"93494415.88Proof LoadFred
UTM 400KIP
Temperature 72 F

Test 25 of 182

DIME Test ID: 2017-05-24-6-25
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1CB07374171\"94069418.44Proof LoadFred
UTM 400KIP
Temperature 72 F

Test 26 of 182

DIME Test ID: 2017-05-24-6-26
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1DB07374171\"94212419.08Proof LoadFred
UTM 400KIP
Temperature 72 F

Test 27 of 182

DIME Test ID: 2017-05-24-6-27
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
12AB07374177/8\"71086316.21Nut Proof LoadFred
UTM 400KIP
Temperature 72 F

Test 28 of 182

DIME Test ID: 2017-05-24-6-28
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number BG0861
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 3.250 in
Gage Type Pass

Test 29 of 182

DIME Test ID: 2017-05-24-6-29
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number BG0861
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 3.250 in
Gage Type Pass

Test 30 of 182

DIME Test ID: 2017-05-24-6-30
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number BG0861
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 3.250 in
Gage Type Pass

Test 31 of 182

DIME Test ID: 2017-05-24-6-31
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number BG0861
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 3.250 in
Gage Type Pass

Test 32 of 182

DIME Test ID: 2017-05-24-6-32
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1E
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number BG0861
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 3.250 in
Gage Type Pass

Test 33 of 182

DIME Test ID: 2017-05-24-6-33
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number TT0085224
Heat Number(s) no data
Mfg. Lot Number BG0753
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.250 in
Gage Type Pass

Test 34 of 182

DIME Test ID: 2017-05-24-6-34
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number TT0085224
Heat Number(s) no data
Mfg. Lot Number BG0753
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.250 in
Gage Type Pass

Test 35 of 182

DIME Test ID: 2017-05-24-6-35
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2C
Rocap Number TT0085224
Heat Number(s) no data
Mfg. Lot Number BG0753
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.250 in
Gage Type Pass

Test 36 of 182

DIME Test ID: 2017-05-24-6-36
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number TT0085225
Heat Number(s) no data
Mfg. Lot Number BG0697
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.750 in
Gage Type Pass

Test 37 of 182

DIME Test ID: 2017-05-24-6-37
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3B
Rocap Number TT0085225
Heat Number(s) no data
Mfg. Lot Number BG0697
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.750 in
Gage Type Pass

Test 38 of 182

DIME Test ID: 2017-05-24-6-38
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3C
Rocap Number TT0085225
Heat Number(s) no data
Mfg. Lot Number BG0697
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.750 in
Gage Type Pass

Test 39 of 182

DIME Test ID: 2017-05-24-6-39
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3D
Rocap Number TT0085225
Heat Number(s) no data
Mfg. Lot Number BG0697
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.750 in
Gage Type Pass

Test 40 of 182

DIME Test ID: 2017-05-24-6-40
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3E
Rocap Number TT0085225
Heat Number(s) no data
Mfg. Lot Number BG0697
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.750 in
Gage Type Pass

Test 41 of 182

DIME Test ID: 2017-05-24-6-41
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4A
Rocap Number TT0085226
Heat Number(s) no data
Mfg. Lot Number BG0565
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 5.50 in
Gage Type Pass

Test 42 of 182

DIME Test ID: 2017-05-24-6-42
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4B
Rocap Number TT0085226
Heat Number(s) no data
Mfg. Lot Number BG0565
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 5.50 in
Gage Type Pass

Test 43 of 182

DIME Test ID: 2017-05-24-6-43
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4C
Rocap Number TT0085226
Heat Number(s) no data
Mfg. Lot Number BG0565
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 5.50 in
Gage Type Pass

Test 44 of 182

DIME Test ID: 2017-05-24-6-44
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4D
Rocap Number TT0085226
Heat Number(s) no data
Mfg. Lot Number BG0565
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 5.50 in
Gage Type Pass

Test 45 of 182

DIME Test ID: 2017-05-24-6-45
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4E
Rocap Number TT0085226
Heat Number(s) no data
Mfg. Lot Number BG0565
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 5.50 in
Gage Type Pass

Test 46 of 182

DIME Test ID: 2017-05-24-6-46
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number TT0085203
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A350 SL USA
Size 1 in
Bolt Length 6 in
Gage Type Pass

Test 47 of 182

DIME Test ID: 2017-05-24-6-47
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5B
Rocap Number TT0085203
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A350 SL USA
Size 1 in
Bolt Length 6 in
Gage Type Pass

Test 48 of 182

DIME Test ID: 2017-05-24-6-48
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5C
Rocap Number TT0085203
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A350 SL USA
Size 1 in
Bolt Length 6 in
Gage Type Pass

Test 49 of 182

DIME Test ID: 2017-05-24-6-49
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6A
Rocap Number TT0085228
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA
Size 1 in
Bolt Length 6 in
Gage Type Pass

Test 50 of 182

DIME Test ID: 2017-05-24-6-50
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6B
Rocap Number TT0085228
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA
Size 1 in
Bolt Length 6 in
Gage Type Pass

Test 51 of 182

DIME Test ID: 2017-05-24-6-51
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6C
Rocap Number TT0085228
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA
Size 1 in
Bolt Length 6 in
Gage Type Pass

Test 52 of 182

DIME Test ID: 2017-05-24-6-52
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6D
Rocap Number TT0085228
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA
Size 1 in
Bolt Length 6 in
Gage Type Pass

Test 53 of 182

DIME Test ID: 2017-05-24-6-53
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6E
Rocap Number TT0085228
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA
Size 1 in
Bolt Length 6 in
Gage Type Pass

Test 54 of 182

DIME Test ID: 2017-05-24-6-54
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7A
Rocap Number TT0085229
Heat Number(s) no data
Mfg. Lot Number BG0709
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 7.50 in
Gage Type Pass

Test 55 of 182

DIME Test ID: 2017-05-24-6-55
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7B
Rocap Number TT0085229
Heat Number(s) no data
Mfg. Lot Number BG0709
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 7.50 in
Gage Type Pass

Test 56 of 182

DIME Test ID: 2017-05-24-6-56
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7C
Rocap Number TT0085229
Heat Number(s) no data
Mfg. Lot Number BG0709
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 7.50 in
Gage Type Pass

Test 57 of 182

DIME Test ID: 2017-05-24-6-57
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7D
Rocap Number TT0085229
Heat Number(s) no data
Mfg. Lot Number BG0709
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 7.50 in
Gage Type Pass

Test 58 of 182

DIME Test ID: 2017-05-24-6-58
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7E
Rocap Number TT0085229
Heat Number(s) no data
Mfg. Lot Number BG0709
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 7.50 in
Gage Type Pass

Test 59 of 182

DIME Test ID: 2017-05-24-6-59
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8A
Rocap Number TT0085230
Heat Number(s) no data
Mfg. Lot Number BG0878
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 8.750 in
Gage Type Pass

Test 60 of 182

DIME Test ID: 2017-05-24-6-60
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8B
Rocap Number TT0085230
Heat Number(s) no data
Mfg. Lot Number BG0878
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 8.750 in
Gage Type Pass

Test 61 of 182

DIME Test ID: 2017-05-24-6-61
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8C
Rocap Number TT0085230
Heat Number(s) no data
Mfg. Lot Number BG0878
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 8.750 in
Gage Type Pass

Test 62 of 182

DIME Test ID: 2017-05-24-6-62
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8D
Rocap Number TT0085230
Heat Number(s) no data
Mfg. Lot Number BG0878
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 8.750 in
Gage Type Pass

Test 63 of 182

DIME Test ID: 2017-05-24-6-63
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8E
Rocap Number TT0085230
Heat Number(s) no data
Mfg. Lot Number BG0878
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 8.750 in
Gage Type Pass

Test 64 of 182

DIME Test ID: 2017-05-24-6-64
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9A
Rocap Number TT0085231
Heat Number(s) no data
Mfg. Lot Number BG0392
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 65 of 182

DIME Test ID: 2017-05-24-6-65
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9B
Rocap Number TT0085231
Heat Number(s) no data
Mfg. Lot Number BG0392
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 66 of 182

DIME Test ID: 2017-05-24-6-66
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9C
Rocap Number TT0085231
Heat Number(s) no data
Mfg. Lot Number BG0392
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 67 of 182

DIME Test ID: 2017-05-24-6-67
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9D
Rocap Number TT0085231
Heat Number(s) no data
Mfg. Lot Number BG0392
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 68 of 182

DIME Test ID: 2017-05-24-6-68
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9E
Rocap Number TT0085231
Heat Number(s) no data
Mfg. Lot Number BG0392
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 69 of 182

DIME Test ID: 2017-05-24-6-69
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10A
Rocap Number TT0085232
Heat Number(s) no data
Mfg. Lot Number 03996/G8782
Finish Coating no data
Product Markings no data
Size no data in
Bolt Length no data in
Gage Type no data

Test 70 of 182

DIME Test ID: 2017-05-24-6-70
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10B
Rocap Number TT0085232
Heat Number(s) no data
Mfg. Lot Number 03996/G8782
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 71 of 182

DIME Test ID: 2017-05-24-6-71
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10C
Rocap Number TT0085232
Heat Number(s) no data
Mfg. Lot Number 03996/G8782
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 72 of 182

DIME Test ID: 2017-05-24-6-72
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10D
Rocap Number TT0085232
Heat Number(s) no data
Mfg. Lot Number 03996/G8782
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 73 of 182

DIME Test ID: 2017-05-24-6-73
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10E
Rocap Number TT0085232
Heat Number(s) no data
Mfg. Lot Number 03996/G8782
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 74 of 182

DIME Test ID: 2017-05-24-6-74
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11A
Rocap Number TT085233
Heat Number(s) no data
Mfg. Lot Number 03996/G8825
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 75 of 182

DIME Test ID: 2017-05-24-6-75
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11B
Rocap Number TT085233
Heat Number(s) no data
Mfg. Lot Number 03996/G8825
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 76 of 182

DIME Test ID: 2017-05-24-6-76
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11C
Rocap Number TT085233
Heat Number(s) no data
Mfg. Lot Number 03996/G8825
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 77 of 182

DIME Test ID: 2017-05-24-6-77
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11D
Rocap Number TT085233
Heat Number(s) no data
Mfg. Lot Number 03996/G8825
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 78 of 182

DIME Test ID: 2017-05-24-6-78
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11E
Rocap Number TT085233
Heat Number(s) no data
Mfg. Lot Number 03996/G8825
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Gage Type Pass

Test 79 of 182

DIME Test ID: 2017-05-24-6-79
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 12A
Rocap Number TT0085234
Heat Number(s) no data
Mfg. Lot Number 040647/G8413
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 5 in
Gage Type Pass

Test 80 of 182

DIME Test ID: 2017-05-24-6-80
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 12B
Rocap Number TT0085234
Heat Number(s) no data
Mfg. Lot Number 040647/G8413
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 5 in
Gage Type Pass

Test 81 of 182

DIME Test ID: 2017-05-24-6-81
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 12C
Rocap Number TT0085234
Heat Number(s) no data
Mfg. Lot Number 040647/G8413
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 5 in
Gage Type Pass

Test 82 of 182

DIME Test ID: 2017-05-24-6-82
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 13A
Rocap Number TT0085236
Heat Number(s) no data
Mfg. Lot Number 040436/G8306
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 6.250 in
Gage Type Pass

Test 83 of 182

DIME Test ID: 2017-05-24-6-83
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 13B
Rocap Number TT0085236
Heat Number(s) no data
Mfg. Lot Number 040436/G8306
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 6.250 in
Gage Type Pass

Test 84 of 182

DIME Test ID: 2017-05-24-6-84
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 13C
Rocap Number TT0085236
Heat Number(s) no data
Mfg. Lot Number 040436/G8306
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 6.250 in
Gage Type Pass

Test 85 of 182

DIME Test ID: 2017-05-24-6-85
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number BG0861
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 3.25 in
Measurement Average 4.3 mils

Test 86 of 182

DIME Test ID: 2017-05-24-6-86
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number BG0861
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 3.25 in
Measurement Average 3.56 mils

Test 87 of 182

DIME Test ID: 2017-05-24-6-87
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number BG0861
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 3.25 in
Measurement Average 5.8 mils

Test 88 of 182

DIME Test ID: 2017-05-24-6-88
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number BG0861
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 3.25 in
Measurement Average 6.27 mils

Test 89 of 182

DIME Test ID: 2017-05-24-6-89
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1E
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number BG0861
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 3.25 in
Measurement Average 5.25 mils

Test 90 of 182

DIME Test ID: 2017-05-24-6-90
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Gage Type Pass

Test 91 of 182

DIME Test ID: 2017-05-24-6-91
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Gage Type Pass

Test 92 of 182

DIME Test ID: 2017-05-24-6-92
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Gage Type Pass

Test 93 of 182

DIME Test ID: 2017-05-24-6-93
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Gage Type Pass

Test 94 of 182

DIME Test ID: 2017-05-24-6-94
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1E
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Gage Type Pass

Test 95 of 182

DIME Test ID: 2017-05-24-6-95
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Bolt Length no data in
Measurement Average 6.42 mils

Test 96 of 182

DIME Test ID: 2017-05-24-6-96
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Bolt Length no data in
Measurement Average 5.24 mils

Test 97 of 182

DIME Test ID: 2017-05-24-6-97
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Bolt Length no data in
Measurement Average 5.64 mils

Test 98 of 182

DIME Test ID: 2017-05-24-6-98
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Bolt Length no data in
Measurement Average 5.46 mils

Test 99 of 182

DIME Test ID: 2017-05-24-6-99
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1E
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Bolt Length no data in
Measurement Average 4.87 mils

Test 100 of 182

DIME Test ID: 2017-05-24-6-100
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 11644490
Finish Coating ASTM F2329 - Hot Dip
Product Markings F436 P
Size 1 in
Bolt Length no data in
Measurement Average 7.79 mils

Test 101 of 182

DIME Test ID: 2017-05-24-6-101
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 11644490
Finish Coating ASTM F2329 - Hot Dip
Product Markings F436 P
Size 1 in
Bolt Length no data in
Measurement Average 7.09 mils

Test 102 of 182

DIME Test ID: 2017-05-24-6-102
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 11644490
Finish Coating ASTM F2329 - Hot Dip
Product Markings F436 P
Size 1 in
Bolt Length no data in
Measurement Average 7.84 mils

Test 103 of 182

DIME Test ID: 2017-05-24-6-103
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 11644490
Finish Coating ASTM F2329 - Hot Dip
Product Markings F436 P
Size 1 in
Bolt Length no data in
Measurement Average 5.88 mils

Test 104 of 182

DIME Test ID: 2017-05-24-6-104
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1E
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 11644490
Finish Coating ASTM F2329 - Hot Dip
Product Markings F436 P
Size 1 in
Bolt Length no data in
Measurement Average 4.76 mils

Test 105 of 182

DIME Test ID: 2017-05-24-6-105
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 11644490
Finish Coating ASTM F2329 - Hot Dip
Product Markings F436 P
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 41.05
Spacing Ok

Test 106 of 182

DIME Test ID: 2017-05-24-6-106
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 11644490
Finish Coating ASTM F2329 - Hot Dip
Product Markings F436 P
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 40.85
Spacing Ok

Test 107 of 182

DIME Test ID: 2017-05-24-6-107
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 11644490
Finish Coating ASTM F2329 - Hot Dip
Product Markings F436 P
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 39.85
Spacing Ok

Test 108 of 182

DIME Test ID: 2017-05-24-6-108
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number TT0085221
Heat Number(s) no data
Mfg. Lot Number 11644490
Finish Coating ASTM F2329 - Hot Dip
Product Markings F436 P
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 42.2
Spacing Ok

Test 109 of 182

DIME Test ID: 2017-05-24-6-109
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number TT0085224
Heat Number(s) no data
Mfg. Lot Number BG0753
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.25 in
Measurement Average 3.79 mils

Test 110 of 182

DIME Test ID: 2017-05-24-6-110
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number TT0085224
Heat Number(s) no data
Mfg. Lot Number BG0753
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.25 in
Measurement Average 3.55 mils

Test 111 of 182

DIME Test ID: 2017-05-24-6-111
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2C
Rocap Number TT0085224
Heat Number(s) no data
Mfg. Lot Number BG0753
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.25 in
Measurement Average 3.8 mils

Test 112 of 182

DIME Test ID: 2017-05-24-6-112
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number TT0085224
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Gage Type Pass

Test 113 of 182

DIME Test ID: 2017-05-24-6-113
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number TT0085224
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Gage Type Pass

Test 114 of 182

DIME Test ID: 2017-05-24-6-114
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number TT0085224
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Bolt Length no data in
Measurement Average 4.61 mils

Test 115 of 182

DIME Test ID: 2017-05-24-6-115
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number TT0085224
Heat Number(s) no data
Mfg. Lot Number 25305-166976
Finish Coating ASTM F2329 - Hot Dip
Product Markings DH U
Size 1 in
Bolt Length no data in
Measurement Average 6.21 mils

Test 116 of 182

DIME Test ID: 2017-05-24-6-116
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number TT0085224
Heat Number(s) no data
Mfg. Lot Number 11644490
Finish Coating ASTM F2329 - Hot Dip
Product Markings F436 P
Size 1 in
Bolt Length no data in
Measurement Average 5.79 mils

Test 117 of 182

DIME Test ID: 2017-05-24-6-117
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2B
Rocap Number TT0085224
Heat Number(s) no data
Mfg. Lot Number 11644490
Finish Coating ASTM F2329 - Hot Dip
Product Markings F436 P
Size 1 in
Bolt Length no data in
Measurement Average 6.15 mils

Test 118 of 182

DIME Test ID: 2017-05-24-6-118
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number TT0085225
Heat Number(s) no data
Mfg. Lot Number BG0697
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.75 in
Measurement Average 4.45 mils

Test 119 of 182

DIME Test ID: 2017-05-24-6-119
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3B
Rocap Number TT0085225
Heat Number(s) no data
Mfg. Lot Number BG0697
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.75 in
Measurement Average 3.53 mils

Test 120 of 182

DIME Test ID: 2017-05-24-6-120
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3C
Rocap Number TT0085225
Heat Number(s) no data
Mfg. Lot Number BG0697
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.75 in
Measurement Average 4 mils

Test 121 of 182

DIME Test ID: 2017-05-24-6-121
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3D
Rocap Number TT0085225
Heat Number(s) no data
Mfg. Lot Number BG0697
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.75 in
Measurement Average 3.52 mils

Test 122 of 182

DIME Test ID: 2017-05-24-6-122
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3E
Rocap Number TT0085225
Heat Number(s) no data
Mfg. Lot Number BG0697
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 4.75 in
Measurement Average 3.22 mils

Test 123 of 182

DIME Test ID: 2017-05-24-6-123
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4A
Rocap Number TT0085226
Heat Number(s) no data
Mfg. Lot Number BG0565
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 5.5 in
Measurement Average 3.99 mils

Test 124 of 182

DIME Test ID: 2017-05-24-6-124
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4B
Rocap Number TT0085226
Heat Number(s) no data
Mfg. Lot Number BG0565
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 5.5 in
Measurement Average 3.01 mils

Test 125 of 182

DIME Test ID: 2017-05-24-6-125
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4C
Rocap Number TT0085226
Heat Number(s) no data
Mfg. Lot Number BG0565
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 5.5 in
Measurement Average 4.02 mils

Test 126 of 182

DIME Test ID: 2017-05-24-6-126
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4D
Rocap Number TT0085226
Heat Number(s) no data
Mfg. Lot Number BG0565
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 5.5 in
Measurement Average 4.02 mils

Test 127 of 182

DIME Test ID: 2017-05-24-6-127
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4E
Rocap Number TT0085226
Heat Number(s) no data
Mfg. Lot Number BG0565
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 5.5 in
Measurement Average 4.56 mils

Test 128 of 182

DIME Test ID: 2017-05-24-6-128
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number TT0085203
Heat Number(s) no data
Mfg. Lot Number 301115
Finish Coating ASTM F2329 - Hot Dip
Product Markings WS
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 36.65
Spacing Ok

Test 129 of 182

DIME Test ID: 2017-05-24-6-129
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5B
Rocap Number TT0085203
Heat Number(s) no data
Mfg. Lot Number 301115
Finish Coating ASTM F2329 - Hot Dip
Product Markings WS
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 37.15
Spacing Ok

Test 130 of 182

DIME Test ID: 2017-05-24-6-130
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number TT0085203
Heat Number(s) no data
Mfg. Lot Number 301115
Finish Coating ASTM F2329 - Hot Dip
Product Markings WS
Size 1 in
Bolt Length no data in
Measurement Average 2.9 mils

Test 131 of 182

DIME Test ID: 2017-05-24-6-131
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5B
Rocap Number TT0085203
Heat Number(s) no data
Mfg. Lot Number 301115
Finish Coating ASTM F2329 - Hot Dip
Product Markings WS
Size 1 in
Bolt Length no data in
Measurement Average 2.54 mils

Test 132 of 182

DIME Test ID: 2017-05-24-6-132
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5C
Rocap Number TT0085203
Heat Number(s) no data
Mfg. Lot Number 301115
Finish Coating ASTM F2329 - Hot Dip
Product Markings WS
Size 1 in
Bolt Length no data in
Measurement Average 2.78 mils

Test 133 of 182

DIME Test ID: 2017-05-24-6-133
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number TT0085203
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 6 in
Measurement Average 2.46 mils

Test 134 of 182

DIME Test ID: 2017-05-24-6-134
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5B
Rocap Number TT0085203
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 6 in
Measurement Average 3.19 mils

Test 135 of 182

DIME Test ID: 2017-05-24-6-135
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5C
Rocap Number TT0085203
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 6 in
Measurement Average 3.14 mils

Test 136 of 182

DIME Test ID: 2017-05-24-6-136
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6A
Rocap Number TT0085228
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 6 in
Measurement Average 3.33 mils

Test 137 of 182

DIME Test ID: 2017-05-24-6-137
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6B
Rocap Number TT0085228
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 6 in
Measurement Average 2.82 mils

Test 138 of 182

DIME Test ID: 2017-05-24-6-138
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6C
Rocap Number TT0085228
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 6 in
Measurement Average 2.92 mils

Test 139 of 182

DIME Test ID: 2017-05-24-6-139
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6D
Rocap Number TT0085228
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 6 in
Measurement Average 2.62 mils

Test 140 of 182

DIME Test ID: 2017-05-24-6-140
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6E
Rocap Number TT0085228
Heat Number(s) no data
Mfg. Lot Number 041972/G8842
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 6 in
Measurement Average 2.37 mils

Test 141 of 182

DIME Test ID: 2017-05-24-6-141
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7A
Rocap Number TT0085229
Heat Number(s) no data
Mfg. Lot Number BG0709
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 7.5 in
Measurement Average 4.84 mils

Test 142 of 182

DIME Test ID: 2017-05-24-6-142
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7B
Rocap Number TT0085229
Heat Number(s) no data
Mfg. Lot Number BG0709
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 7.5 in
Measurement Average 4.67 mils

Test 143 of 182

DIME Test ID: 2017-05-24-6-143
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7C
Rocap Number TT0085229
Heat Number(s) no data
Mfg. Lot Number BG0709
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 7.5 in
Measurement Average 5.12 mils

Test 144 of 182

DIME Test ID: 2017-05-24-6-144
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7D
Rocap Number TT0085229
Heat Number(s) no data
Mfg. Lot Number BG0709
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 7.5 in
Measurement Average 5.74 mils

Test 145 of 182

DIME Test ID: 2017-05-24-6-145
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 7E
Rocap Number TT0085229
Heat Number(s) no data
Mfg. Lot Number BG0709
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 7.5 in
Measurement Average 4.2 mils

Test 146 of 182

DIME Test ID: 2017-05-24-6-146
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8A
Rocap Number TT0085230
Heat Number(s) no data
Mfg. Lot Number BG0878
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 8.75 in
Measurement Average 3.32 mils

Test 147 of 182

DIME Test ID: 2017-05-24-6-147
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8B
Rocap Number TT0085230
Heat Number(s) no data
Mfg. Lot Number BG0878
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 8.75 in
Measurement Average 4.41 mils

Test 148 of 182

DIME Test ID: 2017-05-24-6-148
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8C
Rocap Number TT0085230
Heat Number(s) no data
Mfg. Lot Number BG0878
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 8.75 in
Measurement Average 3.59 mils

Test 149 of 182

DIME Test ID: 2017-05-24-6-149
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8D
Rocap Number TT0085230
Heat Number(s) no data
Mfg. Lot Number BG0878
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 8.75 in
Measurement Average 3.01 mils

Test 150 of 182

DIME Test ID: 2017-05-24-6-150
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8E
Rocap Number TT0085230
Heat Number(s) no data
Mfg. Lot Number BG0878
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 8.75 in
Measurement Average 5.19 mils

Test 151 of 182

DIME Test ID: 2017-05-24-6-151
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9A
Rocap Number TT0085231
Heat Number(s) no data
Mfg. Lot Number BG0392
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Measurement Average 3.63 mils

Test 152 of 182

DIME Test ID: 2017-05-24-6-152
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9B
Rocap Number TT0085231
Heat Number(s) no data
Mfg. Lot Number BG0392
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Measurement Average 3.55 mils

Test 153 of 182

DIME Test ID: 2017-05-24-6-153
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9C
Rocap Number TT0085231
Heat Number(s) no data
Mfg. Lot Number BG0392
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Measurement Average 4.75 mils

Test 154 of 182

DIME Test ID: 2017-05-24-6-154
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9D
Rocap Number TT0085231
Heat Number(s) no data
Mfg. Lot Number BG0392
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Measurement Average 3.99 mils

Test 155 of 182

DIME Test ID: 2017-05-24-6-155
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 9E
Rocap Number TT0085231
Heat Number(s) no data
Mfg. Lot Number BG0392
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Measurement Average 3.6 mils

Test 156 of 182

DIME Test ID: 2017-05-24-6-156
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10A
Rocap Number TT0085232
Heat Number(s) no data
Mfg. Lot Number 03996/G8782
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Measurement Average 4.05 mils

Test 157 of 182

DIME Test ID: 2017-05-24-6-157
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10B
Rocap Number TT0085232
Heat Number(s) no data
Mfg. Lot Number 03996/G8782
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Measurement Average 3.3 mils

Test 158 of 182

DIME Test ID: 2017-05-24-6-158
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10C
Rocap Number TT0085232
Heat Number(s) no data
Mfg. Lot Number 03996/G8782
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Measurement Average 3.79 mils

Test 159 of 182

DIME Test ID: 2017-05-24-6-159
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10D
Rocap Number TT0085232
Heat Number(s) no data
Mfg. Lot Number 03996/G8782
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Measurement Average 3.24 mils

Test 160 of 182

DIME Test ID: 2017-05-24-6-160
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10E
Rocap Number TT0085232
Heat Number(s) no data
Mfg. Lot Number 03996/G8782
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size 1 in
Bolt Length 10 in
Measurement Average 2.78 mils

Test 161 of 182

DIME Test ID: 2017-05-24-6-161
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/01/2017
Date Tested: 06/01/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 11A
Rocap Number TT0085233
Heat Number(s)