Sample Record for 2017-05-16-1
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 210041 DEA: 043G4864 EFIS: 0412000086
QA Service Level: 1
DIST-CO-RTE-PM: 04-SM-92-14.4/18.8
Work Description: CLEAN AND PAINT STRUCTURAL STEEL ON BRIDGE
Location Description: IN SAN MATEO AND ALAMEDA COUNTIES ON ROUTE 92 AT SAN MATEO HAYWARD
Contractor Name: LIBERTY MAINTENANCE, INC.
Contractor Address: 777 N. Meridian Rd., Youngstown, OH 44509
Resident Engineer: Minh Hinh Structure Rep.: Bryan Chew
Sample Information
DIME Sample ID: 2017-05-16-1
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 05/16/2017
Date that the sample was received by the laboratory/organization performing the testing: 05/17/2017
The quantity of what the sample constitutes: 1 lot of 40
A brief description of the sample: 1-1/4 x 9 HH MG Bolts
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Pacific Bolt
Material Information
Rocap Number(s): L1412154
Heat Number(s): A84067
Nut Mfg. Lot Number(s): M36297
Washer Mfg. Lot Number(s): D2602
Bolt Specification: A325
Bolt Length(s): 9"
Nut Specification: A563, Gr. DH
Washer Specification: F436
Finish: MG
Diameter/Size: 1-1/4"
Bolt Mfg. Lot Number: 093783Z
Rocap Test Requirement(s): pass
Lubricant Requirements(s): yes
Test Results
Test 1 of 7
DIME Test ID: 2017-05-16-1-1
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/22/2017
Date Tested: 05/19/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
L1412154
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
093783
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 LE
|
|
Size
|
1.25 in
|
|
Bolt Length
|
9 in
|
|
Gage Type
|
Pass
|
Test 2 of 7
DIME Test ID: 2017-05-16-1-2
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/22/2017
Date Tested: 05/19/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
L1412154
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
093783
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 LE
|
|
Size
|
1.25 in
|
|
Bolt Length
|
9 in
|
|
Measurement Average
|
3.46 mils
|
Test 3 of 7
DIME Test ID: 2017-05-16-1-3
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/22/2017
Date Tested: 05/19/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
L1412154
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
PW721
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
MG U
|
|
Size
|
1.25 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.32 mils
|
Test 4 of 7
DIME Test ID: 2017-05-16-1-4
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/22/2017
Date Tested: 05/19/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
L1412154
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D2602
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 P
|
|
Size
|
1.25 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.97 mils
|
Test 5 of 7
DIME Test ID: 2017-05-16-1-5
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/22/2017
Date Tested: 05/19/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
L1412154
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D2602
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 P
|
|
Size
|
1.25 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
42.1
|
|
Spacing
|
Ok
|
Test 6 of 7
DIME Test ID: 2017-05-16-1-6
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 05/22/2017
Date Tested: 05/19/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | | 1A | PW721 | 1?\" | 147813 | 657.51 | Nut Proof Load | Arnold |
| |
|
UTM
|
400KIP
|
|
Temperature
|
71 F
|
Test 7 of 7
DIME Test ID: 2017-05-16-1-7
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 05/22/2017
Date Tested: 05/19/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
|
Number of Bolt Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | | 1A | B36204917 | 1-1/4\" | 135440 | 602.5 | 6 | A325 | Arnold |
| |
|
UTM
|
400KIP
|
|
Temperature
|
no data
|
