Print Report | Back to Sample Detail

Sample Record for 2017-04-07-8

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 8196 DEA: 59912684 QA Service Level: 1
DIST-CO-RTE-PM: 59---
Work Description:
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2017-04-07-8
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 04/07/2017
Date that the sample was received by the laboratory/organization performing the testing: 04/13/2017
The quantity of what the sample constitutes: 1
A brief description of the sample: A325 Bolt
From where was the sample collected: Distributor
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hodell-Natco Nucor

Material Information

Rocap Number(s):
Heat Number(s):
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s):
Bolt Specification: A325 F2329
Bolt Length(s): 2.5
Nut Specification: NA
Washer Specification: NA
Finish: F2329
Diameter/Size: 0.75"
Bolt Mfg. Lot Number: 360322A
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 3

DIME Test ID: 2017-04-07-8-1
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/19/2017
Date Tested: 04/19/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Test Temperature (F) 72 °F
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 360322A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325TN
Size .75" in
Bolt Length 2.5 in
Gage Type Pass

Test 2 of 3

DIME Test ID: 2017-04-07-8-2
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/19/2017
Date Tested: 04/19/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Test Temperature (F) 72 °F
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 360322A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325TN
Size .75 in
Bolt Length 2.5 in
Measurement Average 3.34 mils

Test 3 of 3

DIME Test ID: 2017-04-07-8-4
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/19/2017
Date Tested: 04/19/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 360322A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325TN
Size .75 in
Bolt Length 2.5 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.35
Spacing Ok

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.