Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2024-11-08-51
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 11/08/2024
Date that the sample was received by the laboratory/organization performing the testing: 11/14/2024
The quantity of what the sample constitutes: 3400
A brief description of the sample: A325 Bolt
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AFC Industries
Rocap Number(s):
Heat Number(s): 10857410
Nut Mfg. Lot Number(s): NA
Washer Mfg. Lot Number(s): NA
Bolt Specification: A325
Bolt Length(s): 1 3/4
Nut Specification: NA
Washer Specification: NA
Finish: HDG
Diameter/Size: 5/8
Bolt Mfg. Lot Number: E690N1
Rocap Test Requirement(s):
Lubricant Requirements(s):
DIME Test ID: 2024-11-08-51-1
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Pitch Diameter
|
0.5751 in
|
Pitch Diameter 2nd
|
no data in
|
DIME Test ID: 2024-11-08-51-2
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Pitch Diameter
|
0.5734 in
|
Pitch Diameter 2nd
|
no data in
|
DIME Test ID: 2024-11-08-51-3
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Pitch Diameter
|
0.5719 in
|
Pitch Diameter 2nd
|
no data in
|
DIME Test ID: 2024-11-08-51-4
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1D
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Pitch Diameter
|
0.5732 in
|
Pitch Diameter 2nd
|
no data in
|
DIME Test ID: 2024-11-08-51-5
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1E
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Pitch Diameter
|
0.5691 in
|
Pitch Diameter 2nd
|
no data in
|
DIME Test ID: 2024-11-08-51-6
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1F
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Pitch Diameter
|
0.5751 in
|
Pitch Diameter 2nd
|
no data in
|
DIME Test ID: 2024-11-08-51-7
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1G
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Pitch Diameter
|
0.5728 in
|
Pitch Diameter 2nd
|
no data in
|
DIME Test ID: 2024-11-08-51-8
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1H
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Pitch Diameter
|
0.5786 in
|
Pitch Diameter 2nd
|
no data in
|
DIME Test ID: 2024-11-08-51-9
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1I
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Pitch Diameter
|
0.5742 in
|
Pitch Diameter 2nd
|
no data in
|
DIME Test ID: 2024-11-08-51-10
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1J
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Pitch Diameter
|
0.5697 in
|
Pitch Diameter 2nd
|
no data in
|
DIME Test ID: 2024-11-08-51-11
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1K
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Pitch Diameter
|
0.5755 in
|
Pitch Diameter 2nd
|
no data in
|
DIME Test ID: 2024-11-08-51-12
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1L
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Pitch Diameter
|
0.5836 in
|
Pitch Diameter 2nd
|
no data in
|
DIME Test ID: 2024-11-08-51-13
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Measurement Average
|
2.6 mils
|
DIME Test ID: 2024-11-08-51-14
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Measurement Average
|
3.3 mils
|
DIME Test ID: 2024-11-08-51-15
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Measurement Average
|
2.5 mils
|
DIME Test ID: 2024-11-08-51-16
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1D
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Measurement Average
|
3 mils
|
DIME Test ID: 2024-11-08-51-17
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1E
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Measurement Average
|
2.7 mils
|
DIME Test ID: 2024-11-08-51-18
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1F
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Measurement Average
|
3.4 mils
|
DIME Test ID: 2024-11-08-51-19
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1G
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Measurement Average
|
3.7 mils
|
DIME Test ID: 2024-11-08-51-20
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1H
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Measurement Average
|
4 mils
|
DIME Test ID: 2024-11-08-51-21
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1I
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Measurement Average
|
3.4 mils
|
DIME Test ID: 2024-11-08-51-22
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1J
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Measurement Average
|
3.4 mils
|
DIME Test ID: 2024-11-08-51-23
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1K
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Measurement Average
|
3.9 mils
|
DIME Test ID: 2024-11-08-51-24
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1L
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Measurement Average
|
3.2 mils
|
DIME Test ID: 2024-11-08-51-25
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
29.8
|
Spacing
|
Ok
|
DIME Test ID: 2024-11-08-51-26
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
29.3
|
Spacing
|
Ok
|
DIME Test ID: 2024-11-08-51-27
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
26.3
|
Spacing
|
Ok
|
DIME Test ID: 2024-11-08-51-28
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1D
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
29
|
Spacing
|
Ok
|
DIME Test ID: 2024-11-08-51-29
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1E
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
27.8
|
Spacing
|
Ok
|
DIME Test ID: 2024-11-08-51-30
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1F
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
28.6
|
Spacing
|
Ok
|
DIME Test ID: 2024-11-08-51-31
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1G
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
28.7
|
Spacing
|
Ok
|
DIME Test ID: 2024-11-08-51-32
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1H
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
28.9
|
Spacing
|
Ok
|
DIME Test ID: 2024-11-08-51-33
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1I
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
29.3
|
Spacing
|
Ok
|
DIME Test ID: 2024-11-08-51-34
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1J
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
30.6
|
Spacing
|
Ok
|
DIME Test ID: 2024-11-08-51-35
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1K
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
26.4
|
Spacing
|
Ok
|
DIME Test ID: 2024-11-08-51-36
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/09/2025
Date Tested: 12/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Atlas Technical Consultants
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1L
|
Rocap Number
|
no data
|
Heat Number(s)
|
10857410
|
Mfg. Lot Number
|
E690N1
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
0.625 in
|
Bolt Length
|
12.75 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
30.2
|
Spacing
|
Ok
|