Print Report | Back to Sample Detail

Sample Record for 2017-03-28-10

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 210041 DEA: 043G4864 EFIS: 0412000086 QA Service Level: 1
DIST-CO-RTE-PM: 04-SM-92-14.4/18.8
Work Description: CLEAN AND PAINT STRUCTURAL STEEL ON BRIDGE
Location Description: IN SAN MATEO AND ALAMEDA COUNTIES ON ROUTE 92 AT SAN MATEO HAYWARD
Contractor Name: LIBERTY MAINTENANCE, INC.
Contractor Address: 777 N. Meridian Rd., Youngstown, OH 44509
Resident Engineer: Minh Hinh Structure Rep.: Bryan Chew

Sample Information

DIME Sample ID: 2017-03-28-10
TL Number from the TL Form:
Sample Submitted By Organization: CT QASI - Bay Area Field Laboratory
Sample Organization Contact: (707) 649-5453
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 03/28/2017
Date that the sample was received by the laboratory/organization performing the testing: 03/30/2017
The quantity of what the sample constitutes: 105
A brief description of the sample: 1 1/4 x 8 1/2 Heavy Hex bolt
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Pacific Bolt

Material Information

Rocap Number(s): L1412027
Heat Number(s): NF15102096 M36297 21606810
Nut Mfg. Lot Number(s): PW721Z
Washer Mfg. Lot Number(s): D2602
Bolt Specification: A325
Bolt Length(s): 8 1/2"
Nut Specification: A563 DH
Washer Specification: F436
Finish: Mech Galv
Diameter/Size: 1 1/4"
Bolt Mfg. Lot Number: 367817A
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 16

DIME Test ID: 2017-03-28-10-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 04/05/2017
Date Tested: 04/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
10APW721Z1?\"148060658.6Nut Proof LoadArnold
UTM 400KIP
Temperature 70 F

Test 2 of 16

DIME Test ID: 2017-03-28-10-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 04/05/2017
Date Tested: 04/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
10AB362018171-1/4\"131140583.36A325Arnold
UTM 400KIP
Temperature no data

Test 3 of 16

DIME Test ID: 2017-03-28-10-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10A
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number 367817A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1.250 in
Bolt Length 8.5 in
Gage Type Pass

Test 4 of 16

DIME Test ID: 2017-03-28-10-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10B
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number 367817A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1.250 in
Bolt Length 8.5 in
Gage Type Pass

Test 5 of 16

DIME Test ID: 2017-03-28-10-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10C
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number 367817A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1.250 in
Bolt Length 8.5 in
Gage Type Pass

Test 6 of 16

DIME Test ID: 2017-03-28-10-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10A
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number 367817A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1.250 in
Bolt Length 8.5 in
Measurement Average 4.66 mils

Test 7 of 16

DIME Test ID: 2017-03-28-10-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10B
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number 367817A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1.250 in
Bolt Length 8.5 in
Measurement Average 4.68 mils

Test 8 of 16

DIME Test ID: 2017-03-28-10-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10C
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number 367817A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1.250 in
Bolt Length 8.5 in
Measurement Average 3.51 mils

Test 9 of 16

DIME Test ID: 2017-03-28-10-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10A
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number PW721Z
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size 1.250 in
Bolt Length no data in
Measurement Average 4.52 mils

Test 10 of 16

DIME Test ID: 2017-03-28-10-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10B
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number PW721Z
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size 1.250 in
Bolt Length no data in
Measurement Average 3.88 mils

Test 11 of 16

DIME Test ID: 2017-03-28-10-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10C
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number PW721Z
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size 1.250 in
Bolt Length no data in
Measurement Average 3.87 mils

Test 12 of 16

DIME Test ID: 2017-03-28-10-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10A
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number D2602
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1.250 in
Bolt Length no data in
Measurement Average 3.79 mils

Test 13 of 16

DIME Test ID: 2017-03-28-10-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10B
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number D2602
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1.250 in
Bolt Length no data in
Measurement Average 4.16 mils

Test 14 of 16

DIME Test ID: 2017-03-28-10-14
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10C
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number D2602
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1.250 in
Bolt Length no data in
Measurement Average 3.64 mils

Test 15 of 16

DIME Test ID: 2017-03-28-10-15
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10A
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number D2602
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1.250 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 41.2
Spacing Ok

Test 16 of 16

DIME Test ID: 2017-03-28-10-16
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 10B
Rocap Number L1412027
Heat Number(s) no data
Mfg. Lot Number D2602
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1.250 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 42.15
Spacing Ok

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.