Print Report | Back to Sample Detail

Sample Record for 2017-03-28-8

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 210041 DEA: 043G4864 EFIS: 0412000086 QA Service Level: 1
DIST-CO-RTE-PM: 04-SM-92-14.4/18.8
Work Description: CLEAN AND PAINT STRUCTURAL STEEL ON BRIDGE
Location Description: IN SAN MATEO AND ALAMEDA COUNTIES ON ROUTE 92 AT SAN MATEO HAYWARD
Contractor Name: LIBERTY MAINTENANCE, INC.
Contractor Address: 777 N. Meridian Rd., Youngstown, OH 44509
Resident Engineer: Minh Hinh Structure Rep.: Bryan Chew

Sample Information

DIME Sample ID: 2017-03-28-8
TL Number from the TL Form:
Sample Submitted By Organization: CT QASI - Bay Area Field Laboratory
Sample Organization Contact: (707) 649-5453
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 03/28/2017
Date that the sample was received by the laboratory/organization performing the testing: 03/30/2017
The quantity of what the sample constitutes: 446
A brief description of the sample: 1-8 x 6 1/2 Heavy Hex bolt
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Pacific Bolt

Material Information

Rocap Number(s): L1412025
Heat Number(s): NF12103853 166642 11606780
Nut Mfg. Lot Number(s): 24618-166642Z
Washer Mfg. Lot Number(s): D2553
Bolt Specification: A325
Bolt Length(s): 6 1/2"
Nut Specification: A563 DH
Washer Specification: F436
Finish: Mech Galv
Diameter/Size: 1"
Bolt Mfg. Lot Number: 319828A
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 12

DIME Test ID: 2017-03-28-8-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 04/05/2017
Date Tested: 04/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
8AB362018171\"82983369.110A325Fred
UTM 400KIP
Temperature no data

Test 2 of 12

DIME Test ID: 2017-03-28-8-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 04/05/2017
Date Tested: 04/03/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
8BB362018171\"85144378.710A325Fred
UTM 400KIP
Temperature no data

Test 3 of 12

DIME Test ID: 2017-03-28-8-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8A
Rocap Number L
Heat Number(s) no data
Mfg. Lot Number 319828A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1 in
Bolt Length 6.5 in
Gage Type Pass

Test 4 of 12

DIME Test ID: 2017-03-28-8-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8B
Rocap Number L
Heat Number(s) no data
Mfg. Lot Number 319828A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1 in
Bolt Length 6.5 in
Gage Type Pass

Test 5 of 12

DIME Test ID: 2017-03-28-8-6
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8C
Rocap Number L
Heat Number(s) no data
Mfg. Lot Number 319828A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1 in
Bolt Length 6.5 in
Gage Type Pass

Test 6 of 12

DIME Test ID: 2017-03-28-8-7
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8D
Rocap Number L
Heat Number(s) no data
Mfg. Lot Number 319828A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1 in
Bolt Length 6.5 in
Gage Type Pass

Test 7 of 12

DIME Test ID: 2017-03-28-8-8
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8E
Rocap Number L
Heat Number(s) no data
Mfg. Lot Number 319828A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1 in
Bolt Length 6.5 in
Gage Type Pass

Test 8 of 12

DIME Test ID: 2017-03-28-8-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8A
Rocap Number L
Heat Number(s) no data
Mfg. Lot Number 319828A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1 in
Bolt Length 6.5 in
Measurement Average 4 mils

Test 9 of 12

DIME Test ID: 2017-03-28-8-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8B
Rocap Number L
Heat Number(s) no data
Mfg. Lot Number 319828A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1 in
Bolt Length 6.5 in
Measurement Average 3.91 mils

Test 10 of 12

DIME Test ID: 2017-03-28-8-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8C
Rocap Number L
Heat Number(s) no data
Mfg. Lot Number 319828A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1 in
Bolt Length 6.5 in
Measurement Average 3.58 mils

Test 11 of 12

DIME Test ID: 2017-03-28-8-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8D
Rocap Number L
Heat Number(s) no data
Mfg. Lot Number 319828A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1 in
Bolt Length 6.5 in
Measurement Average 3.67 mils

Test 12 of 12

DIME Test ID: 2017-03-28-8-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 04/05/2017
Date Tested: 04/04/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 8E
Rocap Number L
Heat Number(s) no data
Mfg. Lot Number 319828A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 N
Size 1 in
Bolt Length 6.5 in
Measurement Average 3.54 mils

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.