Print Report | Back to Sample Detail

Sample Record for 2024-09-27-66

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994800 DEA: 080H7924 EFIS: 0821000076 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-15-5.1/5.8
Work Description: RAMP METERING SYSTEM, MODIFY LTG SYSTEMS, HMA (TYPE A), & RHMA.
Location Description: SAN BERNARDINO COUNTY IN RANCHO CUCAMONGA FROM 0.2 MILE SOUTH TO 0.5 MILE NORTH OF FOOTHILL BOULEVARD UNDERCROSSING
Contractor Name: POWELL CONSTRUCTORS INC
Contractor Address: 8555 Banana Avenue, Fontana, CA 92335
Resident Engineer: Dominic Ehirim Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-09-27-66
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/27/2024
Date that the sample was received by the laboratory/organization performing the testing: 10/14/2024
The quantity of what the sample constitutes: 2 BOXES OF HMA
A brief description of the sample: 3/4" HMA A SP R15 NO LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 0540A-24
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AAA-Corona

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number: 105793

Test Results

Test 1 of 1

DIME Test ID: 2024-09-27-66-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 10/19/2024
Date Tested: 10/15/2024
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2,122.0 g
Corrected Asphalt Binder Content 4.87 %
Mass Loss 114.0 g
Correction Factor (Percent by mass of HMA Specimen) 0.36 %
Moisture Content 0.00 %
Temperature Compensation Factor 0.14 %
Test Temperature 538 C