Print Report | Back to Sample Detail

Sample Record for 2017-02-28-6

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 208945 DEA: 07288604 EFIS: 0700021080 COOP: 074663 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-710-6.0-9.4
Work Description: Gerald Desmond Bridge Replacement - A Design Build project. IQA samples will be selected by Port/Caltrans representatives and sent to Translab for testing.
Location Description: Port of Long Beach (District 7)
Contractor Name: Shimmick/FCC/Impregilo (SFI) JV
Contractor Address: 11 Golden Shore, Suite 330, Long Beach, CA 90802
Resident Engineer: Structure Rep.:

Sample Information

DIME Sample ID: 2017-02-28-6
TL Number from the TL Form: C969283
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Acceptance
Type of Material: SMTL TM7 - Epoxy Coated Rebar
Sample Taken Date: 02/28/2017
Date that the sample was received by the laboratory/organization performing the testing: 03/02/2017
The quantity of what the sample constitutes: 6
A brief description of the sample: A934
From where was the sample collected: Fabricator
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CMC Rebar Gerdau Fletcher

Material Information

Rebar Heat Number(s): 4060100 6502406602
Rebar Epoxy Batch Number(s): 6E11 6J30C179
Rebar Coating Specification: ASTM A934
Rebar Size (#): 7 11
Rebar Coating Color: Purple
Rebar Manufacturer: CMC,Gerdau
Rebar Coater: Fletcher Coating Company
Rebar Powder Manufacturer: 3M
Release Number: 6156P
Quality Assurance Code: A93417B27R4S16J30 3M A93417B17R2S16E11 3M

Test Results

Test 1 of 4

DIME Test ID: 2017-02-28-6-1
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 03/07/2017
Date Tested: 03/06/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
First Bar Mean 9.25 mils
Second Bar Mean 8.83 mils
Lower spec. limit LSL 7 mils
Upper spec. limit USL 12 mils
Bar # for First Bar no data
Bar # for Second Bar no data
Total mean value 9.04 mils
Total number of values less than LSL no data
Total number of values greater than USL no data

Test 2 of 4

DIME Test ID: 2017-02-28-6-2
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Holiday)
Verified Date: 03/07/2017
Date Tested: 03/06/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Total Number of Holiday 0
Total Length 5 ft
Holidays Per Linear Foot of Bar 0 holiday pe
Holiday Test Pass/Fail Pass
Bend Test Pass/Fail Pass

Test 3 of 4

DIME Test ID: 2017-02-28-6-3
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 03/07/2017
Date Tested: 03/06/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
First Bar Mean 8.59 mils
Second Bar Mean 10.82 mils
Lower spec. limit LSL 7 mils
Upper spec. limit USL 12 mils
Bar # for First Bar no data
Bar # for Second Bar no data
Total mean value 9.7 mils
Total number of values less than LSL no data
Total number of values greater than USL no data

Test 4 of 4

DIME Test ID: 2017-02-28-6-4
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Holiday)
Verified Date: 03/07/2017
Date Tested: 03/06/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Total Number of Holiday 0
Total Length 5 ft
Holidays Per Linear Foot of Bar 0 holiday pe
Holiday Test Pass/Fail Pass
Bend Test Pass/Fail Pass