Print Report | Back to Sample Detail

Sample Record for 2017-01-11-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 211616 DEA: 050G0404 EFIS: 0500020020 QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO,MON-101-63.2/R69.3,R0.0/R1.9
Work Description: ROADWAY REHABILITATION AND BRIDGE CONSTRUCTION.
Location Description: SAN LUIS OBISPO AND MONTERY COUNTIES NEAR PASO ROBLES FROM 0.5 MILE SOUTH OF SAN MARCOS CREEK BRIDGE TO 0.2 MILE SOUTH OF BRADLEY ROAD OVERCROSSING
Contractor Name: SECURITY PAVING COMPANY, INC.
Contractor Address: 9050 NORRIS AVENUE, SUN VALLEY, CA 91352
Resident Engineer: Andrew Borrelli Structure Rep.: Garret Hilton

Sample Information

DIME Sample ID: 2017-01-11-2
TL Number from the TL Form: c594915
Sample Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Sample Organization Contact: (916) 594-1991
Type of Sample: Quality Assurance
Type of Material: Polyester
Sample Taken Date: 01/11/2017
Date that the sample was received by the laboratory/organization performing the testing: 01/11/2017
The quantity of what the sample constitutes: 2 tankers
A brief description of the sample: polyester resin
From where was the sample collected: Manufacturer
Laboratory sample identification: 17-002
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: reichhold azusa

Material Information

Mfg. Lot Number(s): 1022586
Batch number: 1022586
Mix number: 3220
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2017-01-11-2-1
Test Method: CONCLP 3-16: Polyester Resin
Verified Date: 05/25/2017
Date Tested: 05/25/2017
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: bond results accepted on Q.C.
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F 105 cps
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F 1
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35% 63.7 %
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi 3026 psi
Styrene ASTM D 2369 40% to 50 % 44.1 %
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours 793 psi
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams 0.5 grams