Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 8196 DEA: 59912684
QA Service Level: 1
DIST-CO-RTE-PM: 59---
Work Description:
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2017-01-24-3
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 01/24/2017
Date that the sample was received by the laboratory/organization performing the testing: 01/26/2017
The quantity of what the sample constitutes: 3
A brief description of the sample: A325 HDG Rocap Assembiy
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hodell-Natco Union Metals
Rocap Number(s): 3211-012517
Heat Number(s): Lot 366321A
Nut Mfg. Lot Number(s): 381625A
Washer Mfg. Lot Number(s): 0816-341
Bolt Specification: ASTM A325
Bolt Length(s): 5.5
Nut Specification: ASTM A563
Washer Specification: ASTM F436
Finish: ASTM F2329 - Hot Dip
Diameter/Size: 1
Bolt Mfg. Lot Number:
Rocap Test Requirement(s):
Lubricant Requirements(s):
DIME Test ID: 2017-01-24-3-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | 1A | NA | 1\" | 89911 | 399.9 | A325 | Brian |
| |
UTM
|
400KIP
|
Temperature
|
70 F
|
DIME Test ID: 2017-01-24-3-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A563 Nut Proof
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | 1A | N/A | 1\" | 93952 | 417.92 | A563 Nut Proof | Brian |
| |
UTM
|
400KIP
|
Temperature
|
70 F
|
DIME Test ID: 2017-01-24-3-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
366321A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A325 N
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Gage Type
|
Go
|
DIME Test ID: 2017-01-24-3-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
366321A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A325 N
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Gage Type
|
Go
|
DIME Test ID: 2017-01-24-3-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
366321A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A325 N
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Gage Type
|
Go
|
DIME Test ID: 2017-01-24-3-6
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
381625A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A563
|
Size
|
1 in
|
Gage Type
|
Go
|
DIME Test ID: 2017-01-24-3-7
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
381625A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A563
|
Size
|
1 in
|
Gage Type
|
Go
|
DIME Test ID: 2017-01-24-3-8
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
381625A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A563
|
Size
|
1 in
|
Gage Type
|
Go
|
DIME Test ID: 2017-01-24-3-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
366321A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A325 N
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Measurement Average
|
8.49 mils
|
DIME Test ID: 2017-01-24-3-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
366321A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A325 N
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Measurement Average
|
3.09 mils
|
DIME Test ID: 2017-01-24-3-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
366321A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A325 N
|
Size
|
1 in
|
Bolt Length
|
5.5 in
|
Measurement Average
|
4.49 mils
|
DIME Test ID: 2017-01-24-3-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
381625A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A563
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.13 mils
|
DIME Test ID: 2017-01-24-3-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
381625A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A563
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.63 mils
|
DIME Test ID: 2017-01-24-3-14
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
381625A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A563
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.32 mils
|
DIME Test ID: 2017-01-24-3-15
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
816341
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
F436 TSI
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.42 mils
|
DIME Test ID: 2017-01-24-3-16
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
816341
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
F436 TSI
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Measurement Average
|
4.85 mils
|
DIME Test ID: 2017-01-24-3-17
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
816341
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
F436 TSI
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Measurement Average
|
4.05 mils
|
DIME Test ID: 2017-01-24-3-18
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
816341
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
F436 TSI
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
39.95
|
Spacing
|
Ok
|
DIME Test ID: 2017-01-24-3-19
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/30/2017
Date Tested: 01/27/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
3211-012517
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
816341
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
F436 TSI
|
Size
|
1 in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
39.5
|
Spacing
|
Ok
|