Sample Record for 2017-01-20-3
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 210097 DEA: 100L9704 EFIS: 1012000053
QA Service Level: 1
DIST-CO-RTE-PM: 10-TUO-120-R19.5/R20.0
Work Description: REPLACE DECK AND RETROFIT BRIDGE.
Location Description: IN TUOLUMNE COUNTY ON STATE ROUTE 120 FROM 7.6 MILES EAST OF YOSEMITEJUNCTION TO 4.8 MILES WEST OF THE TOWN OF MOCCASIN AT TUOLUMNE RIVER/DON PEDRO RESERVOIR (JAMES E.
Contractor Name: Golden State Bridge
Contractor Address: 3701 Mallard Drive, Benicia, CA 94510
Resident Engineer: Corey Casey Structure Rep.: Ehab Wahed
Sample Information
DIME Sample ID: 2017-01-20-3
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 01/20/2017
Date that the sample was received by the laboratory/organization performing the testing: 01/24/2017
The quantity of what the sample constitutes: 9
A brief description of the sample: Rocap Assembly
From where was the sample collected: Job Site
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Midwest Structural Products
Material Information
Rocap Number(s): R26658-01
Heat Number(s):
Nut Mfg. Lot Number(s): 373078B
Washer Mfg. Lot Number(s): 0816-344
Bolt Specification: ASTM A325
Bolt Length(s): 2.5
Nut Specification: ASTM A563
Washer Specification: ASTM F436
Finish: ASTM B695 - Mech Galv
Diameter/Size: 0.75
Bolt Mfg. Lot Number:
Rocap Test Requirement(s):
Lubricant Requirements(s):
Test Results
Test 1 of 14
DIME Test ID: 2017-01-20-3-1
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
R26658-01
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
373078B
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
DH N
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Measurement Average
|
4.01 mils
|
Test 2 of 14
DIME Test ID: 2017-01-20-3-2
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
R26658-01
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
373078B
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
DH N
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.09 mils
|
Test 3 of 14
DIME Test ID: 2017-01-20-3-3
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
R26658-01
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
373078B
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
DH N
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Measurement Average
|
4.98 mils
|
Test 4 of 14
DIME Test ID: 2017-01-20-3-4
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
R26658-01
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
0816-344
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 TSI
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.05 mils
|
Test 5 of 14
DIME Test ID: 2017-01-20-3-5
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
R26658-01
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
0816-344
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 TSI
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.26 mils
|
Test 6 of 14
DIME Test ID: 2017-01-20-3-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
R26658-01
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
0816-344
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 TSI
|
Size
|
0.75 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.04 mils
|
Test 7 of 14
DIME Test ID: 2017-01-20-3-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
R26658-01
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
378406A
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 N
|
Size
|
0.75 in
|
Bolt Length
|
2.5 in
|
Measurement Average
|
2.58 mils
|
Test 8 of 14
DIME Test ID: 2017-01-20-3-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
R26658-01
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
378406A
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 N
|
Size
|
0.75 in
|
Bolt Length
|
2.5 in
|
Measurement Average
|
3.55 mils
|
Test 9 of 14
DIME Test ID: 2017-01-20-3-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
R26658-01
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
378406A
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 N
|
Size
|
0.75 in
|
Bolt Length
|
2.5 in
|
Measurement Average
|
2.88 mils
|
Test 10 of 14
DIME Test ID: 2017-01-20-3-10
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
R26658-01
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
378406A
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 N
|
Size
|
0.75 in
|
Bolt Length
|
2.5 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
29.35
|
Spacing
|
Ok
|
Test 11 of 14
DIME Test ID: 2017-01-20-3-11
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
R26658-01
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
378406A
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325 N
|
Size
|
0.75 in
|
Bolt Length
|
2.5 in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
29.15
|
Spacing
|
Ok
|
Test 12 of 14
DIME Test ID: 2017-01-20-3-12
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
R26658-01
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
0816-344
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 TSI
|
Size
|
no data in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
39.9
|
Spacing
|
Ok
|
Test 13 of 14
DIME Test ID: 2017-01-20-3-13
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
R26658-01
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
0816-344
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
F436 TSI
|
Size
|
no data in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
40.6
|
Spacing
|
Ok
|
Test 14 of 14
DIME Test ID: 2017-01-20-3-14
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 01/31/2017
Date Tested: 01/25/2017
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | 1A | 373078B | ?\" | 50643 | 225.27 | Nut Proof Load | Arnold |
| |
UTM
|
400KIP
|
Temperature
|
72 F
|