Print Report | Back to Sample Detail

Sample Record for 2024-09-04-62

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994947 DEA: 112T3644 EFIS: 1121000108 QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-56-0.3/3.0
Work Description: CONSTRUCT JPCP, HMA, RHMA-G, SIGNS, BARRIERS, LANDSCAPE, & ELECTRICAL.
Location Description: SAN DIEGO COUNTY IN SAN DIEGO FROM EL CAMINO REAL UNDERCROSSING TO 0.3 MILE WEST OF CARMEL VALLEY ROAD OVERCROSSING
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 5860 El Camino Real #200, Carlsbad, CA 92008
Resident Engineer: Steve Mcmillan Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-09-04-62
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 518-8709
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/04/2024
Date that the sample was received by the laboratory/organization performing the testing: 09/10/2024
The quantity of what the sample constitutes: 12 boxes
A brief description of the sample: PSUE
From where was the sample collected: Source
Laboratory sample identification: 0908-PSU
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Martin Marietta

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number: 21218080SR MM
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 6

Test Results

Test 1 of 6

DIME Test ID: 2024-09-04-62-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/17/2024
Date Tested: 09/16/2024
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Complies - Target 7.50 %
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 3993.9 g
Mass of the specimen and specimen basket assembly prior to ignition 5535.5 g
Mass of HMA Sample prior to ignition 1541.6 g
Corrected Asphalt Binder Content 7.7 %
Mass Loss 121.6 g
Mass of aggregate remaining after ignition 1420 g
Correction Factor (Percent by mass of HMA Specimen) 0.19 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 C

Test 2 of 6

DIME Test ID: 2024-09-04-62-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 09/17/2024
Date Tested: 09/17/2024
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Complies Target 2.457 Tested 3 times (1)-2.425 (2)-2.456 (3)-2.413
Test Result Compliance: complies
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7475.6 grams
Mass of oven-dry sample in air for Sample 1 1550 grams
Mass of container filled with the sample and water for Sample 1 8386.3 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.425
Theoretical maximum density at 25°C (77°F) 150.9 lb/ft^3

Test 3 of 6

DIME Test ID: 2024-09-04-62-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 09/17/2024
Date Tested: 09/16/2024
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Does not Comply Tested at 2 Weights 4550g Failed at 6.0 % and 4800g at 6.3%
Test Result Compliance: does not comply
Additional Comments When Verified:
Bulk Specific Gravity 2.279
Bulk Specific Gravity 2 2.272
Average Bulk Specific Gravity 2.276

Test 4 of 6

DIME Test ID: 2024-09-04-62-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 09/17/2024
Date Tested: 09/16/2024
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Does not Comply - Tested at 2 different weights 4550g at 6.0% and 4800g 6.3%
Test Result Compliance: does not comply
Additional Comments When Verified:
Percent Air Voids 6 %
Percent Air Voids 2 6.3 %
Average Percent Air Voids 6.2 %

Test 5 of 6

DIME Test ID: 2024-09-04-62-5
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 09/26/2024
Date Tested: 09/25/2024
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Does not Comply DRY < 100
Test Result Compliance: does not comply
Additional Comments When Verified:
Unit system used? SI Units
Average Dry Tensile Strength 76 psi
Average Wet Tensile Strength 51 psi
Tensile Strength Ratio 0.67

Test 6 of 6

DIME Test ID: 2024-09-04-62-6
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Verified Date: 09/26/2024
Date Tested: 09/24/2024
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Complies Target - < 12.7 mm
Test Result Compliance: complies
Additional Comments When Verified:
Specimen Preparation Method no data
Test Temperature 122 F
Air Void Content for specimen A-1 no data
Air Void Content for specimen A-2 no data
Air Void Content for specimen B-1 no data
Air Void Content for specimen B-2 no data
Stripping Inflection Point (Wheel A) >20000
Stripping Inflection Point (Wheel B) >20000
Maximum impression at 5000 passes (left wheel) 1.09 mm
Maximum impression at 5000 passes (right wheel) 1.08 mm
Average impression at 5000 passes (left/right avg) 1.09 mm
Maximum impression at 10000 passes (left wheel) 1.3 mm
Maximum impression at 10000 passes (right wheel) 1.37 mm
Average impression at 10000 passes (left/right avg) 1.34 mm
Maximum impression at 15000 passes (left wheel) 1.49 mm
Maximum impression at 15000 passes (right wheel) 1.57 mm
Average impression at 15000 passes (left/right avg) 1.53 mm
Maximum impression at 20000 passes (left wheel) 1.64 mm
Maximum impression at 20000 passes (right wheel) 1.75 mm
Average impression at 20000 passes (left/right avg) 1.69 mm
Average impression at 25000 passes (left/right avg) no data