Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000179 DEA: 081M8504 EFIS: 0822000054
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-111-0.0/18.5
Work Description: RHMA (GAP-GRADED), COLD PLANE AC PVMT, THERMOPLASTIC TRAFFIC STRIPE.
Location Description: RIVERSIDE COUNTY AT SALTON SEA FROM IMPERIAL COUNTY LINE TO 0.1 MILE NORTH OF 66TH AVENUE
Contractor Name: MARTIN MARIETTA SAN DIEGO AGGREGATES LLC DBA ATP GENERAL ENGINEERING CONTRACTORS
Contractor Address: 2225 Kansas Ave, Riverside, CA 92507
Resident Engineer: Khoi Vu Structure Rep.: Unknown
DIME Sample ID: 2024-08-28-53
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/28/2024
Date that the sample was received by the laboratory/organization performing the testing: 08/30/2024
The quantity of what the sample constitutes: 9 boxes of RHMA
A brief description of the sample: 3/4" RHMA-G-SP
From where was the sample collected: Manufacturer
Laboratory sample identification: 0443G-24
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Martin Marietta -Coachella
DIME Test ID: 2024-08-28-53-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/04/2024
Date Tested: 08/31/2024
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
2137.4 g
|
|
Corrected Asphalt Binder Content
|
7.71 %
|
|
Mass Loss
|
166.8 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
-0.04 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.14 %
|
|
Test Temperature
|
538 C
|