Print Report | Back to Sample Detail

Sample Record for 2024-08-09-75

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215677 DEA: 044G0804 EFIS: 0412000332 COOP: 042676 QA Service Level: 1
DIST-CO-RTE-PM: 04-SOL-80-R10.4/30.2
Work Description: Highway widening, overhead signs, and electronic toll system.
Location Description: In Solano County in Fairfield and Vacaville from 1.0 mile west of Red Top Road Undercrossing to 0.4 mile east of Leisure Town Road Overcrossing.
Contractor Name: O.C. JONES & SONS, INC.
Contractor Address: 1520 Fourth Street, Berkeley, CA 94710
Resident Engineer: Justen Tatum Structure Rep.: Kelsey Littell

Sample Information

DIME Sample ID: 2024-08-09-75
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/09/2024
Date that the sample was received by the laboratory/organization performing the testing: 08/29/2024
The quantity of what the sample constitutes: 0-1600 Tons
A brief description of the sample: 3/4"HMA+15%RAP
From where was the sample collected: Source
Laboratory sample identification: Con_24_614
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Teichert Woodland Batch Plant

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 2
Sublot number: 12
HMA Mix Number: 30640432428P
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2024-08-09-75-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/30/2024
Date Tested: 08/20/2024
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test: LOT 2 SUBLOT 12 Theoretical maximum density at 25°C (77°F)=2499.2
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Specific Gravity for Sample 1 2.507
Theoretical maximum density at 25°C (77°F) 24992 kg/m^3

Test 2 of 4

DIME Test ID: 2024-08-09-75-2
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/30/2024
Date Tested: 08/09/2024
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test: Teichert Woodland Batch Plant
Test Result Compliance: complies
Additional Comments When Verified:
Percent Air Voids 93.4 %
Percent Air Voids 2 94.8 %
Percent Air Voids 3 95.1 %
Average Percent Air Voids 94.4 %

Test 3 of 4

DIME Test ID: 2024-08-09-75-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/30/2024
Date Tested: 08/29/2024
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test: Teichert Woodland Batch Plant
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.341
Bulk Specific Gravity 2 2.377
Bulk Specific Gravity 3 2.383
Average Bulk Specific Gravity 2.367

Test 4 of 4

DIME Test ID: 2024-08-09-75-4
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/30/2024
Date Tested: 08/20/2024
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test: Teichert Woodland Batch Plant
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2134.6 g
Corrected Asphalt Binder Content 4.59 %
Mass Loss 122.5 g
Correction Factor (Percent by mass of HMA Specimen) 1.01 %
Moisture Content no data0 %
Temperature Compensation Factor 0.14 %
Test Temperature 538 C