DEPARTMENT OF TRANSPORTATION
DIVISION OF ENGINEERING SERVICES
MATERIALS ENGINEERING AND TESTING SERVICES
Concrete Materials Testing Branch
5900 Folsom Blvd.
Sacramento, CA 95819
916-227-7205
Contract # 032G5404 Cty YOL Rte 128 PM VAR
Vendor #
|
Gavin Newsom, Governor |
DEPARTMENT OF TRANSPORTATIONDIVISION OF ENGINEERING SERVICES MATERIALS ENGINEERING AND TESTING SERVICES Concrete Materials Testing Branch 5900 Folsom Blvd. Sacramento, CA 95819 916-227-7205 |
Contract # 032G5404 Cty YOL Rte 128 PM VAR Vendor # |
|
REPORT OF LABORATORY TESTING |
||||
|
Resident Engineer: |
Nimi Badwalz |
Date Reported: |
10/09/2024 |
|
|
Address: |
TL Number: |
|
||
|
City: |
||||
|
Project Name: PLACE AND FURNISH POLYESTER CONCRETE OVERLAY, & REPLACE JOINT SEALS. |
||||
|
Prime Contractor: BRIDGEWAY CIVIL CONSTRUCTORS, INC. |
||||
|
Sample Taken Date: |
08/28/2024 |
Mix Design: |
48013B01 |
|
|
Contractor: Unknown |
Location : YOLO COUNTY AT VARIOUS LOCATIONS |
|||
|
Structure unique identifier: 22-0115L |
||||
|
Structure name: Cottonwood Slough |
||||
|
Location of Pour: Bridge Deck |
||||
The following testing has been tested in accordance with:
ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Average diameter of cylinder (in) | Cross sectional area of cylinder (in^2) | Maximum load on cylinder (lb) | Compressive strength of cylinder (psi) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 4.03 | 12.76 | 45694 | 3582.0 | 1 |
| 2 | 4.02 | 12.69 | 50496 | 3978.0 | 1 |
| 3 | 4.02 | 12.69 | 49036 | 3863 | 1 |
DIME Test ID: 2024-08-28-27-3
Number of specimens: 3
Compressive strength (to nearest 10 psi): 3810
Age of specimen: 7 days
Certified By: Spencer Adams
ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Average diameter of cylinder (in) | Cross sectional area of cylinder (in^2) | Maximum load on cylinder (lb) | Compressive strength of cylinder (psi) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 4.02 | 12.69 | 62416 | 4918.0 | 1 |
| 2 | 4.02 | 12.69 | 67741 | 5337.0 | 1 |
| 3 | 4.02 | 12.69 | 64554 | 5086 | 1 |
DIME Test ID: 2024-08-28-27-4
Number of specimens: 3
Compressive strength (to nearest 10 psi): 5110
Age of specimen: 28 days
Certified By: Spencer Adams
ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Average diameter of cylinder (in) | Cross sectional area of cylinder (in^2) | Maximum load on cylinder (lb) | Compressive strength of cylinder (psi) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 4.02 | 12.69 | 58558 | 4614.0 | 1 |
| 2 | 4.02 | 12.69 | 60057 | 4732.0 | 4 |
| 3 | 4.02 | 12.69 | 63435 | 4998 | 1 |
DIME Test ID: 2024-08-28-27-5
Number of specimens: 3
Compressive strength (to nearest 10 psi): 4780
Age of specimen: 42 days
Certified By: Spencer Adams
|
*Subject to final inspection by the Resident Engineer. |
|
TL- Report of Laboratory Testing