DEPARTMENT OF TRANSPORTATION

DIVISION OF ENGINEERING SERVICES

MATERIALS ENGINEERING AND TESTING SERVICES

Concrete Materials Testing Branch

5900 Folsom Blvd.

Sacramento, CA 95819

916-227-7205

Contract # 031H9904 Cty PLA Rte 80 PM 68.3/69.7,0.0/R2.7

Vendor #

	REPORT OF LABORATORY TESTING
Resident Engineer:	Randie Babbini	Date Reported:	10/08/2024
Address:		TL Number:	084204
City:
Project Name: RDWY EXC, PLACE HMA & JPCP, SLAB REPLACEMENT & POLYESTER CONC OVERLAY.
Prime Contractor: A. TEICHERT & SON INC DBA TEICHERT CONSTRUCTION
Sample Taken Date:	08/27/2024	Mix Design:	Unknown
Contractor: Unknown		Location : PLACER AND NEVADA COUNTIES NEAR KINGVALE FROM 0.3 MILE WEST OF TROY UNDERCROSSING TO 0.2 MILE EAST OF SODA SPRINGS OVERCROSSING
Structure unique identifier:
Structure name:
Location of Pour:

The following testing has been tested in accordance with:

ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

Capped in accordance with ASTM C617/CTM521

Cured in accordance with ASTM C511

Specimen	Average diameter of cylinder (in)	Cross sectional area of cylinder (in^2)	Maximum load on cylinder (lb)	Compressive strength of cylinder (psi)	Type of fracture pattern of cylinder
1	4.01	12.63	55404	4387.0	1
2	4.01	12.63	55216	4372.0	1
3	4.00	12.57	55384	4407	1

DIME Test ID: 2024-08-27-37-1
Number of specimens: 3
Compressive strength (to nearest 10 psi): 4390
Age of specimen: 7 days
Certified By: Spencer Adams

ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

Capped in accordance with ASTM C617/CTM521

Cured in accordance with ASTM C511

Specimen	Average diameter of cylinder (in)	Cross sectional area of cylinder (in^2)	Maximum load on cylinder (lb)	Compressive strength of cylinder (psi)	Type of fracture pattern of cylinder
1	4.01	12.63	67301	5329.0	1
2	4.01	12.63	68292	5407.0	1
3	4.00	12.57	66498	5292	1

DIME Test ID: 2024-08-27-37-2
Number of specimens: 3
Compressive strength (to nearest 10 psi): 5340
Age of specimen: 28 days
Certified By: Spencer Adams

ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

Capped in accordance with ASTM C617/CTM521

Cured in accordance with ASTM C511

Specimen	Average diameter of cylinder (in)	Cross sectional area of cylinder (in^2)	Maximum load on cylinder (lb)	Compressive strength of cylinder (psi)	Type of fracture pattern of cylinder
1	4.00	12.57	69868	5560.0	1
2	4.01	12.63	72572	5746.0	1
3	4.01	12.63	72779	5763	1

DIME Test ID: 2024-08-27-37-3
Number of specimens: 3
Compressive strength (to nearest 10 psi): 5690
Age of specimen: 42 days
Certified By: Spencer Adams

Summary of Items Observed and Conversations:

Comments: This report is for the purpose of reporting test results.
Should you require recommendations concerning repairs or remedial efforts please contact the METS representative,
who represents the Materials Engineering and Testing Services for your project.


*Subject to final inspection by the Resident Engineer.

TL- Report of Laboratory Testing

DEPARTMENT OF TRANSPORTATION

Summary of Items Observed and Conversations:

Comments: This report is for the purpose of reporting test results. Should you require recommendations concerning repairs or remedial efforts please contact the METS representative, who represents the Materials Engineering and Testing Services for your project.

Comments: This report is for the purpose of reporting test results.
Should you require recommendations concerning repairs or remedial efforts please contact the METS representative,
who represents the Materials Engineering and Testing Services for your project.