Sample Record for 2024-08-28-2
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 994588 DEA: 081H3904 EFIS: 0817000032
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-15-R20.5/R21.6,R25.5/R30.7
Work Description: CONSTRUCT BUILDING, ROADWAY EXC, JPCP, AND TEMPORARY BARRIER SYSTEM.
Location Description: SAN BERNARDINO COUNTY FROM 0.6 MILE NORTH OF CLEGHORN ROAD UNDERCROSSING TO 0.5 MILE SOUTH OF ROUTE 138 AND FROM 0.5 MILE SOUTH OF TRUCK SAFETY CHECK AREA TO 0.4 MILE NORTH OF OAK HILL ROAD OVERCROSSING
Contractor Name: POWELL CONSTRUCTORS INC
Contractor Address: 8555 BANANA AVE, FONTANA, CA 92335
Resident Engineer: Mauricio Santa Cruz Structure Rep.: Oluwatayo (Tayo) Ogeyemi
Sample Information
DIME Sample ID: 2024-08-28-2
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Retest
Type of Material: SMTL TM7 - Epoxy Coated Rebar
Sample Taken Date: 08/28/2024
Date that the sample was received by the laboratory/organization performing the testing: 09/05/2024
The quantity of what the sample constitutes: 429 Each
A brief description of the sample: #6 Epoxy Coated Bent Bar
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: American Highway
Material Information
Rebar Heat Number(s): 1202060503
Rebar Epoxy Batch Number(s): CH1644GF, CH2613TV
Rebar Coating Specification: ASTM A934
Rebar Size (#): 6
Rebar Coating Color: Purple
Rebar Manufacturer: Nucor
Rebar Coater: American Highway
Rebar Powder Manufacturer: Sherwin Williams
Release Number:
Quality Assurance Code:
Test Results
Test 1 of 2
DIME Test ID: 2024-08-28-2-1
Test Method: ASTM A934-19: Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars (Epoxy-Coating)
Verified Date: 09/12/2024
Date Tested: 09/11/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Lower spec. limit LSL
|
7 mils
|
|
Upper spec. limit USL
|
12 mils
|
|
Bar # for First Bar
|
1
|
|
Bar # for Second Bar
|
2
|
|
First Bar Mean
|
9.31
|
|
Second Bar Mean
|
7.36
|
|
Total mean value
|
8.33
|
Test 2 of 2
DIME Test ID: 2024-08-28-2-2
Test Method: ASTM A934-19: Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars (Holiday Bend)
Verified Date: 09/12/2024
Date Tested: 09/11/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
|
Total Number of Holiday
|
5
|
|
Total Length
|
3.3
|
|
Holidays Per Linear Foot of Bar
|
1.5
|
|
Holiday Test Pass/Fail
|
Fail
|
|
Bend Test Pass/Fail
|
NA
|