Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994675 DEA: 07390204 EFIS: 0722000334
QA Service Level: 1
DIST-CO-RTE-PM: 07---
Work Description:
Location Description:
Contractor Name: Skanska
Contractor Address: 1995 Agua Mansa Rd, Riverside, CA 92509
Resident Engineer: Sam Gallardo Structure Rep.: Sami Deeb
DIME Sample ID: 2024-08-14-41
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM6 - Steel Check Sample Plate
Sample Taken Date: 08/14/2024
Date that the sample was received by the laboratory/organization performing the testing: 08/16/2024
The quantity of what the sample constitutes: 24
A brief description of the sample: Steel Check Plate
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Job Site
DIME Test ID: 2024-08-14-41-1
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/04/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 1 | 0.25 | 0.04909 | 50506 | 69129 | 27 | aauvinen | | Sample 1 | 0.251 | 0.04948 | 52071 | 69154 | 27.8 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-2
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/04/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 2 | 0.25 | 0.04909 | 51774 | 69564 | 31.7 | aauvinen | | Sample 2 | 0.25 | 0.04909 | 52287 | 69594 | 28.8 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-3
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/04/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 3 | 0.25 | 0.04909 | 50427 | 67963 | 28 | aauvinen | | Sample 3 | 0.251 | 0.04948 | 49039 | 67840 | 30 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-4
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/04/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 4 | 0.25 | 0.04909 | 47495 | 62575 | 32.7 | aauvinen | | Sample 4 | 0.251 | 0.04948 | 48038 | 62048 | 34 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-5
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/04/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 5 | 0.249 | 0.0487 | 50968 | 68300 | 35.6 | aauvinen | | Sample 5 | 0.25 | 0.04909 | 49714 | 67863 | 31.5 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-6
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/04/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 6 | 0.25 | 0.04909 | 46091 | 60409 | 37.7 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-13
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/05/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 13 | 0.251 | 0.04948 | 65451 | 92501 | 24.3 | aauvinen | | Sample 13 | 0.252 | 0.04988 | 65701 | 92022 | 25.9 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-14
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/05/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 14 | 0.251 | 0.04948 | 54538 | 86461 | 29 | aauvinen | | Sample 14 | 0.251 | 0.04948 | 54412 | 86043 | 27.8 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-15
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/05/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 15 | 0.251 | 0.04948 | 56968 | 90033 | 26.1 | aauvinen | | Sample 15 | 0.251 | 0.04948 | 55158 | 88039 | 25.7 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-25
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/06/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 1
Test Result Compliance: complies
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
19.6 ftlb
|
|
Impact Energy 2
|
18.1 ftlb
|
|
Impact Energy 3
|
18.6 ftlb
|
|
Average Impact Energy
|
19 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-26
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/06/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 2
Test Result Compliance: complies
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
28.1 ftlb
|
|
Impact Energy 2
|
27.2 ftlb
|
|
Impact Energy 3
|
26.6 ftlb
|
|
Average Impact Energy
|
27 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-27
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/06/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 3
Test Result Compliance: complies
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
63.8 ftlb
|
|
Impact Energy 2
|
69.9 ftlb
|
|
Impact Energy 3
|
66.6 ftlb
|
|
Average Impact Energy
|
67 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-28
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/06/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 4
Test Result Compliance: complies
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
57.3 ftlb
|
|
Impact Energy 2
|
60.4 ftlb
|
|
Impact Energy 3
|
60 ftlb
|
|
Average Impact Energy
|
59 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-29
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/06/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 5
Test Result Compliance: complies
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
47.1 ftlb
|
|
Impact Energy 2
|
46.6 ftlb
|
|
Impact Energy 3
|
47.8 ftlb
|
|
Average Impact Energy
|
47 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-30
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/06/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 6
Test Result Compliance: complies
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
74.2 ftlb
|
|
Impact Energy 2
|
76 ftlb
|
|
Impact Energy 3
|
65.1 ftlb
|
|
Average Impact Energy
|
72 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-37
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/09/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 13
7mm x 10mm
Test Result Compliance: complies
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
20.2 ftlb
|
|
Impact Energy 2
|
19.2 ftlb
|
|
Impact Energy 3
|
18.2 ftlb
|
|
Average Impact Energy
|
19 ftlb
|
|
Striker Radius
|
8 mm
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-38
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/06/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 14
Test Result Compliance: complies
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
34.6 ftlb
|
|
Impact Energy 2
|
48.3 ftlb
|
|
Impact Energy 3
|
51.8 ftlb
|
|
Average Impact Energy
|
45 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-16
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/09/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 16 | 0.251 | 0.04948 | 64331 | 91007 | 25.5 | aauvinen | | Sample 16 | 0.25 | 0.04909 | 65154 | 92019 | 29.5 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-17
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/09/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 17 | 0.25 | 0.04909 | 50732 | 81276 | 31.4 | aauvinen | | Sample 17 | 0.25 | 0.04909 | 51138 | 81402 | 31.5 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-18
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/09/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 18 | 0.251 | 0.04948 | 48118 | 80248 | 31.4 | aauvinen | | Sample 18 | 0.25 | 0.04909 | 48977 | 79929 | 31.1 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-39
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/09/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 15
Test Result Compliance: complies
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
29.8 ftlb
|
|
Impact Energy 2
|
33.8 ftlb
|
|
Impact Energy 3
|
43.2 ftlb
|
|
Average Impact Energy
|
36 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-40
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/09/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 16
7mm x 10mm
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
45.5 ftlb
|
|
Impact Energy 2
|
48.8 ftlb
|
|
Impact Energy 3
|
46.5 ftlb
|
|
Average Impact Energy
|
47 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-41
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/09/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 17
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
65.7 ftlb
|
|
Impact Energy 2
|
59.7 ftlb
|
|
Impact Energy 3
|
49.9 ftlb
|
|
Average Impact Energy
|
58 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-42
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/09/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 18
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
58.5 ftlb
|
|
Impact Energy 2
|
68.3 ftlb
|
|
Impact Energy 3
|
50.6 ftlb
|
|
Average Impact Energy
|
59 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-19
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/12/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 19 | 0.25 | 0.04909 | 63374 | 90478 | 26 | aauvinen | | Sample 19 | 0.25 | 0.04909 | 62632 | 90201 | 28.2 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-20
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/12/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 20 | 0.25 | 0.04909 | 54535 | 85219 | 30.8 | aauvinen | | Sample 20 | 0.25 | 0.04909 | 55186 | 85676 | 32.4 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-21
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/12/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 21 | 0.249 | 0.0487 | 51591 | 82324 | 30.6 | aauvinen | | Sample 21 | 0.25 | 0.04909 | 51114 | 81949 | 30.5 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-22
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 22 | 0.251 | 0.04948 | 64404 | 92909 | 28.4 | aauvinen | | Sample 22 | 0.251 | 0.04948 | 63897 | 92833 | 32.4 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-23
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 23 | 0.251 | 0.04948 | 55553 | 91031 | 28.3 | aauvinen | | Sample 23 | 0.251 | 0.04948 | 55234 | 90481 | 27.9 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-24
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 24 | 0.251 | 0.04948 | 56831 | 92412 | 29 | aauvinen | | Sample 24 | 0.251 | 0.04948 | 57152 | 92669 | 29.3 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-43
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 19
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
45.5 ftlb
|
|
Impact Energy 2
|
46.9 ftlb
|
|
Impact Energy 3
|
46.1 ftlb
|
|
Average Impact Energy
|
46 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-44
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 20
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
43.9 ftlb
|
|
Impact Energy 2
|
50.6 ftlb
|
|
Impact Energy 3
|
54 ftlb
|
|
Average Impact Energy
|
50 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-45
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 21
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
37.6 ftlb
|
|
Impact Energy 2
|
38.8 ftlb
|
|
Impact Energy 3
|
35.5 ftlb
|
|
Average Impact Energy
|
37 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-46
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 22
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
43.6 ftlb
|
|
Impact Energy 2
|
41.6 ftlb
|
|
Impact Energy 3
|
47.3 ftlb
|
|
Average Impact Energy
|
44 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-47
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 23
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
31.3 ftlb
|
|
Impact Energy 2
|
23.6 ftlb
|
|
Impact Energy 3
|
19.4 ftlb
|
|
Average Impact Energy
|
25 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-48
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/18/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 24
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
72 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
70 oF
|
|
Impact Energy 1
|
31.3 ftlb
|
|
Impact Energy 2
|
34.5 ftlb
|
|
Impact Energy 3
|
26.1 ftlb
|
|
Average Impact Energy
|
31 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-8
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/20/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 8 | 0.251 | 0.04948 | 48285 | 63507 | 37.8 | aauvinen | | Sample 8 | 0.252 | 0.04988 | 47746 | 63869 | 42.9 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-10
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/20/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 10 | 0.252 | 0.04988 | 46308 | 68400 | 37.9 | aauvinen | | Sample 10 | 0.252 | 0.04988 | 48996 | 68023 | 36 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-12
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/01/2024
Date Tested: 09/20/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Sample 12 | 0.25 | 0.04909 | 48989 | 67701 | 37.1 | aauvinen | | Sample 12 | 0.252 | 0.04988 | 51349 | 68025 | 38.2 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-08-14-41-31
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 7
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
70 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
72 oF
|
|
Impact Energy 1
|
25.7 ftlb
|
|
Impact Energy 2
|
34.3 ftlb
|
|
Impact Energy 3
|
32.6 ftlb
|
|
Average Impact Energy
|
31 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-32
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 8
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
70 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
72 oF
|
|
Impact Energy 1
|
60.5 ftlb
|
|
Impact Energy 2
|
63.1 ftlb
|
|
Impact Energy 3
|
58.6 ftlb
|
|
Average Impact Energy
|
61 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-33
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 9
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
70 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
72 oF
|
|
Impact Energy 1
|
39.1 ftlb
|
|
Impact Energy 2
|
36 ftlb
|
|
Impact Energy 3
|
35.6 ftlb
|
|
Average Impact Energy
|
37 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-34
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 10
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
70 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
72 oF
|
|
Impact Energy 1
|
59.1 ftlb
|
|
Impact Energy 2
|
62.7 ftlb
|
|
Impact Energy 3
|
59.7 ftlb
|
|
Average Impact Energy
|
61 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-35
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 11
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
70 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
72 oF
|
|
Impact Energy 1
|
35.1 ftlb
|
|
Impact Energy 2
|
32.6 ftlb
|
|
Impact Energy 3
|
36.8 ftlb
|
|
Average Impact Energy
|
35 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-36
Test Method: ASTM E23-18: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 12
Test Result Compliance:
Additional Comments When Verified:
|
Temperature Required
|
70 oF
|
|
Minimum Energy Required
|
no data0 ftlb
|
|
Test Temperature 1
|
72 oF
|
|
Impact Energy 1
|
59.8 ftlb
|
|
Impact Energy 2
|
73.3 ftlb
|
|
Impact Energy 3
|
63.7 ftlb
|
|
Average Impact Energy
|
66 ftlb
|
|
Striker Radius
|
8
|
|
Value Exceeds The Machine Capacity?
|
No
|
DIME Test ID: 2024-08-14-41-49
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 1
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
74.47
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-50
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 2
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
73.37
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-51
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 3
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
74.15
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-52
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 4
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
70.45
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-53
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 5
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
5A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
75.02
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-54
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 6
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
6A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
66.85
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-56
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 8
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
8A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
70.95
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-58
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 10
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
10A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
72.15
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-60
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 12
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
12A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
72.1
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-61
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 13
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
13A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
88.22
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-62
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 14
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
14A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
88.45
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-63
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 15
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
15A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
87.87
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-64
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 16
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
16A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
88.67
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-65
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 17
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
17A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
84.2
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-66
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 18
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
18A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
83.27
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-67
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 19
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
19A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
88.5
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-68
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 20
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
20A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
86.42
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-69
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 21
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
21A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
84.25
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-70
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 22
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
22A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
87.92
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-71
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 23
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
23A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
88.02
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-72
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 24
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
24A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
87.72
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-55
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/25/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 7
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
7A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
73.25
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-57
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/25/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 9
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
9A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
72.45
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-59
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/01/2024
Date Tested: 09/25/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 11
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
11A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
71.82
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-08-14-41-73
Test Method: ASTM E415-21: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
Verified Date: 10/01/2024
Date Tested: 09/27/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 7
Test Result Compliance:
Additional Comments When Verified:
|
Content, carbon
|
0.196 %
|
|
Content, Si
|
0.0825 %
|
|
Content, Mn
|
0.625 %
|
|
Content, P
|
0.0080 %
|
|
Content, S
|
0.0230 %
|
|
Content, Cr
|
0.0184 %
|
|
Content, Mo
|
0.0073 %
|
|
Content, Al
|
0.0028 %
|
|
Content, Co
|
0.0110 %
|
|
Content, Copper
|
0.0505 %
|
|
Content, Nb
|
0.0010 %
|
|
Content, Ti
|
0.00057 %
|
|
Content, V
|
0.00050 %
|
|
Content, Lead
|
0.0174 %
|
|
Content, Boron
|
0.00089 %
|
|
Content, Fe
|
98.9 %
|
|
Content, Ni
|
0.0409 %
|
DIME Test ID: 2024-08-14-41-74
Test Method: ASTM E415-21: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
Verified Date: 10/01/2024
Date Tested: 09/25/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 9
Test Result Compliance:
Additional Comments When Verified:
|
Content, carbon
|
0.178 %
|
|
Content, Si
|
0.0752 %
|
|
Content, Mn
|
0.625 %
|
|
Content, P
|
0.0084 %
|
|
Content, S
|
0.0224 %
|
|
Content, Cr
|
0.0156 %
|
|
Content, Mo
|
0.0065 %
|
|
Content, Al
|
0.0023 %
|
|
Content, Co
|
0.0106 %
|
|
Content, Copper
|
0.0444 %
|
|
Content, Nb
|
0.0010 %
|
|
Content, Ti
|
0.00053 %
|
|
Content, V
|
0.00054 %
|
|
Content, Lead
|
0.0173 %
|
|
Content, Boron
|
0.00098 %
|
|
Content, Fe
|
98.9 %
|
|
Content, Ni
|
0.0393 %
|
DIME Test ID: 2024-08-14-41-75
Test Method: ASTM E415-21: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
Verified Date: 10/01/2024
Date Tested: 09/25/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Sample 11
Test Result Compliance:
Additional Comments When Verified:
|
Content, carbon
|
0.191 %
|
|
Content, Si
|
0.0760 %
|
|
Content, Mn
|
0.601 %
|
|
Content, P
|
0.0081 %
|
|
Content, S
|
0.0244 %
|
|
Content, Cr
|
0.0185 %
|
|
Content, Mo
|
0.0071 %
|
|
Content, Al
|
0.0022 %
|
|
Content, Co
|
0.0100 %
|
|
Content, Copper
|
0.0507 %
|
|
Content, Nb
|
0.0010 %
|
|
Content, Ti
|
0.00050 %
|
|
Content, V
|
0.00050 %
|
|
Content, Lead
|
0.0174 %
|
|
Content, Boron
|
0.00083 %
|
|
Content, Fe
|
98.9 %
|
|
Content, Ni
|
0.0411 %
|
