Print Report | Back to Sample Detail

Sample Record for 2024-07-18-101

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993905 DEA: 034H5814 EFIS: 0320000240 QA Service Level: 1
DIST-CO-RTE-PM: 03-SAC-5-27.6/29.5,30.4/34.3
Work Description: ROADWAY EXCAVATION, PLACE CL2 AB, HMA & RHMA, & MODIFY RAMP METERS.
Location Description: SACRAMENTO COUNTY IN AND NEAR SACRAMENTO FROM 0.5 MILES SOUTH OF ARENA BOULEVARD OVERCROSSING TO 0.4 MILES SOUTH OF 99/5 INTERCHANGE AND FROM 0.5 MILES NORTH OF THE 99/5 INTERCHANGE TO 0.4 MILE SOUTH OF THE YOLO COUNTY LINE
Contractor Name: DeSILVA GATES CONSTRUCTION
Contractor Address: 3855 N Freeway, Ste. 100, Sacramento, CA 95834
Resident Engineer: Hani Eissa Structure Rep.: Brent Bullard

Sample Information

DIME Sample ID: 2024-07-18-101
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 07/18/2024
Date that the sample was received by the laboratory/organization performing the testing: 08/16/2024
The quantity of what the sample constitutes: 1 Cans
A brief description of the sample: 3/4" RHMA-G, PG 64-16
From where was the sample collected: Source
Laboratory sample identification: 3972
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: DeSilva Gates

Material Information

Asphalt modifier supplier:
Performance Grade: PG 64-16
Lot number: 1
Sublot number: 5
Asphalt Rubber Binder Mix Number:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2024-07-18-101-1
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 08/23/2024
Date Tested: 08/23/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Determination Unworked Penetration
Unworked Penetration 25 0.1 mm

Test 2 of 4

DIME Test ID: 2024-07-18-101-2
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 08/23/2024
Date Tested: 08/21/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
ASTM Thermometer used? C
Softening Point Sample 1 79 C
Softening Point Sample 2 78 C
Bath Liquid freshly boiled distilled water
Minutes Reaction no data

Test 3 of 4

DIME Test ID: 2024-07-18-101-3
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 08/23/2024
Date Tested: 08/21/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Temperature 25 C
Ball Penetration (P1) no data0 mm
Final Dial reading (F1) 55 mm
Ball Penetration (P2) no data0 mm
Final Dial reading (F2) 54 mm
Ball Penetration (P3) no data0 mm
Final Dial reading (F3) 53 mm
Resilience 1 45 %
Resilience 2 46 %
Resilience 3 47 %
Average Resilience 46 %
Minutes Reaction no data

Test 4 of 4

DIME Test ID: 2024-07-18-101-4
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 08/23/2024
Date Tested: 08/22/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: Retest
Test Result Compliance: does not comply
Additional Comments When Verified:
ASTM Thermometer used? C
Softening Point Sample 1 79 C
Softening Point Sample 2 77 C
Bath Liquid freshly boiled distilled water
Minutes Reaction no data