Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000002 DEA: 010M6404 EFIS: 0123000051
QA Service Level: 1
DIST-CO-RTE-PM: 01-LAK-29-R45.1/52.5
Work Description: RHMA-G, COLD PLANE AC PAVEMENT, AND PAVEMENT DELINEATION.
Location Description: LAKE COUNTY NEAR LAKEPORT FROM PARK WAY OVERCROSSING TO ROUTE 20
Contractor Name: ARGONAUT CONSTRUCTORS , INC.
Contractor Address: 360 Sutton Place, Santa Rosa, CA 95402
Resident Engineer: Daniel Kraft Structure Rep.: Unknown
DIME Sample ID: 2024-08-02-57
TL Number from the TL Form: 802722
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 08/02/2024
Date that the sample was received by the laboratory/organization performing the testing: 08/14/2024
The quantity of what the sample constitutes: 1 can binder
A brief description of the sample: 1 can PG 58-22 binder
From where was the sample collected: Source
Laboratory sample identification: 24-155
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite HWY 175
Performance Grade: PG 58-22
Modified: No
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: Valero Marketing & Supply - Benicia CA
Multigrade: No
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2024-08-02-57-1
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 08/21/2024
Date Tested: 08/19/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: Original
Test Result Compliance: complies
Additional Comments When Verified:
|
Phase
|
Original binder
|
|
Test Gap
|
1 mm
|
|
Test Frequency
|
10.0 rad/s
|
|
Strain Amplitude
|
12.00 %
|
|
Stress Amplitude
|
0.172 kPa
|
|
Phase Angle (δ) (for the 10 cycles)
|
85.1 degree
|
|
Complex Modulus (G*) (for the 10 measurements)
|
1.422 kPa
|
|
Test Temperature (Specimen 1)
|
58.0 C
|
|
Dynamic Shear, G*/sin(δ)
|
1.43 kPa
|