Print Report | Back to Sample Detail

Sample Record for 2024-08-07-65

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994582 DEA: 073203U4 EFIS: 0722000071 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-91,605-R16.6/R16.8,R0.0/R10.4
Work Description: PLACE CONCRETE PAVEMENT AND HIGH FRICTION SURFACE TREATMENT.
Location Description: LOS ANGELES COUNTY ON ROUTE 605 FROM 0.2 MILE NORTH OF KATELLA AVENUE UNDECROSSING TO 0.1 MILE NORTH OF TELEGRAPH ROAD UNDERCROSSING AND ON ROUTE 91 FROM 0.4 MILE WEST OF ROUTE 605 UNDERCROSSING TO 0.2 MILE WEST OF ROUTE 605 UNDERCROSSING
Contractor Name: RASMUSSEN/VANGUARD
Contractor Address: 28548 LIVINGSTON AVENUE, VALENCIA CA 91335
Resident Engineer: Martin Oregel Structure Rep.: Tien Chu

Sample Information

DIME Sample ID: 2024-08-07-65
TL Number from the TL Form:
Sample Submitted By Organization: Sika Corporation
Sample Organization Contact: (562) 941-0231
Type of Sample: Per Request
Type of Material: High Friction Surface Treatment
Sample Taken Date: 08/07/2024
Date that the sample was received by the laboratory/organization performing the testing: 08/08/2024
The quantity of what the sample constitutes: 23100 gallons
A brief description of the sample: 1 gallon can / HFST RESIN
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sika Corporation

Material Information

Mgf. Lot Number(s): A3008955935 B3008955954
Batch Number: A3008955935 B3008955954
Mix Number: A3008955935 B3008955954
Resin Binder Type: Epoxy
Used for Overlay: Yes
Used for Inlay: No
Test results on following page(s): 3

Test Results

Test 1 of 3

DIME Test ID: 2024-08-07-65-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 08/21/2024
Date Tested: 08/19/2024
Submitted By Organization: Sika Corporation
Organization Address: 12767 East Imperial Highway ,
Organization City: Santa Fe Springs
Organization State: CA
Organization Zipcode: 90670
Organization Email: vu.thao@us.sika.com
Organization Phone: (562) 941-0231
General Comments for this Test: see attached report
Test Result Compliance:
Additional Comments When Verified:
Viscosity 2452

Test 2 of 3

DIME Test ID: 2024-08-07-65-2
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 08/27/2024
Date Tested: 08/26/2024
Submitted By Organization: Sika Corporation
Organization Address: 12767 East Imperial Highway ,
Organization City: Santa Fe Springs
Organization State: CA
Organization Zipcode: 90670
Organization Email: vu.thao@us.sika.com
Organization Phone: (562) 941-0231
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 5
Conditioning procedure 18/25/50+5/70
Speed of testing 0.45 in/min
Sample 1 Width 0.5 in
Sample 1 Ultimate strength 2860 psi
Sample 1 Thickness 0.151 in
Sample 1 Area 0.0755 in^2
Sample 1 Ultimate Strength Actual 216 lbs
Sample 1 percent elongation 32.5 %
Sample 1 Time 1 MM:SS
Sample 2 Width 0.5 in
Sample 2 Thickness 0.146 in
Sample 2 Area 0.073 in^2
Sample 2 Ultimate strength 2840 psi
Sample 2 Ultimate Strength Actual 207 lbs
Sample 2 percent elongation 37 %
Sample 2 Time 1 MM:SS
Sample 3 Width 0.5 in
Sample 3 Thickness 0.14 in
Sample 3 Area 0.07 in^2
Sample 3 Ultimate strength 2840 psi
Sample 3 Ultimate Strength Actual 199 lbs
Sample 3 percent elongation 34.5 %
Sample 3 Time 1 MM:SS
Sample 4 Width 0.5 in
Sample 4 Thickness 0.133 in
Sample 4 Area 0.0665 in^2
Sample 4 Ultimate strength 2960 psi
Sample 4 Ultimate Strength Actual 197 lbs
Sample 4 percent elongation 31.5 %
Sample 4 Time 1 MM:SS
Sample 5 Width 0.5 in
Sample 5 Thickness 0.132 in
Sample 5 Area 0.066 in^2
Sample 5 Ultimate strength 2950 psi
Sample 5 Ultimate Strength Actual 195 lbs
Sample 5 percent elongation 30.3 %
Sample 5 Time 1 MM:SS
Ultimate Strength Average 2890 psi
Percent Elongation Average 33.1 %

Test 3 of 3

DIME Test ID: 2024-08-07-65-3
Test Method: ASTM D570-18: Standard Test Method for Water Absorption of Plastics
Verified Date: 08/27/2024
Date Tested: 08/26/2024
Submitted By Organization: Sika Corporation
Organization Address: 12767 East Imperial Highway ,
Organization City: Santa Fe Springs
Organization State: CA
Organization Zipcode: 90670
Organization Email: vu.thao@us.sika.com
Organization Phone: (562) 941-0231
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Water Absorption 0.2 %