Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994857 DEA: 010H6104 EFIS: 0117000241
QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM-36-13.5/R36.1
Work Description: COLD PLANE AND OVERLAY HMA, & REPLACE GUARDRAILS.
Location Description: HUMBOLDT COUNTY AT AND NEAR BRIDGEVILLE FROM 3.4 MILES WEST OF GRIZZLY CREEK BRIDGE TO 0.8 MILE EAST OF SOUTH FORK VAN DUZEN RIVER
Contractor Name: MERCER FRASER COMPANY
Contractor Address: PO Box 1006, Eureka, CA 95502
Resident Engineer: Joaquin Rodriquez Structure Rep.: Shantanu Nalawade
DIME Sample ID: 2024-07-29-66
TL Number from the TL Form:
Sample Submitted By Organization: CT D01 - Fortuna Field Laboratory
Sample Organization Contact: (707) 496-0974
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/29/2024
Date that the sample was received by the laboratory/organization performing the testing: 07/29/2024
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 1/2" HMA Type A w/ RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Mercer Fraser - Fortuna Plant B
DIME Test ID: 2024-07-29-66-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/09/2024
Date Tested: 07/29/2024
Submitted By Organization: CT D01 - Fortuna Field Laboratory
Organization Address: 1050 River Ranch Road,
Organization City: Fortuna
Organization State: California
Organization Zipcode: 95540
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 496-0974
General Comments for this Test: HMA
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Fahrenheit
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
1604.1 g
|
|
Corrected Asphalt Binder Content
|
5.05 %
|
|
Mass Loss
|
94.4 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
-0.84 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
no data0 %
|
|
Test Temperature
|
482 F
|
DIME Test ID: 2024-07-29-66-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/09/2024
Date Tested: 07/29/2024
Submitted By Organization: CT D01 - Fortuna Field Laboratory
Organization Address: 1050 River Ranch Road,
Organization City: Fortuna
Organization State: California
Organization Zipcode: 95540
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 496-0974
General Comments for this Test: RAP
Test Result Compliance: not applicable
Additional Comments When Verified:
|
What temperature unit is used?
|
Fahrenheit
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
1744.2 g
|
|
Corrected Asphalt Binder Content
|
5.45 %
|
|
Mass Loss
|
95.1 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
no data0 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
no data0 %
|
|
Test Temperature
|
538 F
|