Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000221 DEA: 010M6804 EFIS: 0123000055
QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM-36-6.0/13.4
Work Description: MICRO-SURFACING, LOW CARBON MICRO-SURFACING, AND DELINEATION.
Location Description: HUMBOLDT COUNTY NEAR CARLOTTA FROM 0.2 MILE WEST OF WILDER ROAD TO VAN DUZEN RIVER BRIDGE 04-0094
Contractor Name: PAVEMENT COATINGS CO.
Contractor Address: Unknown
Resident Engineer: Cody Long Structure Rep.: Unknown
DIME Sample ID: 2024-08-05-39
TL Number from the TL Form: C827386
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphaltic Emulsion
Sample Taken Date: 08/05/2024
Date that the sample was received by the laboratory/organization performing the testing: 08/07/2024
The quantity of what the sample constitutes: 2 bottle of emulsion
A brief description of the sample: Emulsion- MSE
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Western Emulsion White City
DIME Test ID: 2024-08-05-39-1
Test Method: AASHTO T59-22: Standard Method of Test for Emulsified Asphalts (Emulsified Asphalt Residue Evap. (Sec. 7))
Verified Date: 08/08/2024
Date Tested: 08/08/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: EVAP
Test Result Compliance: complies
Additional Comments When Verified:
|
How many beakers will be used to conduct the test?
|
4
|
|
Beaker 1 Residue
|
64.2 %
|
|
Beaker 2 Residue
|
64.2 %
|
|
Beaker 3 Residue
|
64.2 %
|
|
Beaker 4 Residue
|
64.2 %
|
|
Percentage of residue
|
64 %
|
DIME Test ID: 2024-08-05-39-2
Test Method: AASHTO T59-22: Standard Method of Test for Emulsified Asphalts (Particle Charge Cationic Emulsified (Sec. 8))
Verified Date: 08/08/2024
Date Tested: 08/08/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: particle charge
Test Result Compliance: complies
Additional Comments When Verified:
|
Level of current used
|
8.0 mA
|
|
Electrode Type
|
Positive
|
DIME Test ID: 2024-08-05-39-3
Test Method: AASHTO T301-22: Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer
Verified Date: 08/08/2024
Date Tested: 08/08/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: ER
Test Result Compliance: complies
Additional Comments When Verified:
|
Final Reading from the testing machine (X)
|
3.0 cm
|
|
% Elongation Recovery
|
85 %
|
DIME Test ID: 2024-08-05-39-4
Test Method: AASHTO T53-18: Standard Method of Test for Softening Point of Bitumen (Ring-and-Ball Apparatus)
Verified Date: 08/08/2024
Date Tested: 08/08/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: softening point
Test Result Compliance: complies
Additional Comments When Verified:
|
Thermometer used?
|
113C
|
|
Correction Needed?
|
No
|
|
Bath Liquid
|
Distilled Water
|
|
Mean Temperature
|
65.5 °C
|
DIME Test ID: 2024-08-05-39-5
Test Method: AASHTO T49-15: Standard Method of Test for Penetration of Bituminous Materials
Verified Date: 08/08/2024
Date Tested: 08/08/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: Pen
Test Result Compliance: complies
Additional Comments When Verified:
|
Was test performed on residue from distillation or evaporation?
|
Evaporation
|
|
Temperature (C)
|
25 C
|
|
Load (grams)
|
50 grams
|
|
Time (sec)
|
5 second
|
|
Average Penetration
|
49 dmm
|
DIME Test ID: 2024-08-05-39-6
Test Method: AASHTO T59-22: Standard Method of Test for Emulsified Asphalts (Sieve Test (Sec. 13))
Verified Date: 08/08/2024
Date Tested: 08/08/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: Sieve Test
Test Result Compliance: complies
Additional Comments When Verified:
|
Sample retained
|
no data0 %
|
