Print Report | Back to Sample Detail

Sample Record for 2024-07-29-39

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000024 DEA: 061G1204 EFIS: 0623000149 QA Service Level: 1
DIST-CO-RTE-PM: 06-KER-178-13.6/24.6
Work Description: HOT MIX ASPHALT, PRECOATED AGGREGATE AND ASPHALT-RUBBER BINDER.
Location Description: KERN COUNTY NEAR BAKERSFIELD FROM 1.9 MILES EAST OF COTTONWOOD CREEK BRIDGE TO 2.0 MILES WEST OF DEMOCRAT ROAD
Contractor Name: GRIFFITH COMPANY
Contractor Address: 1128 Carrier Parkway, Bakersfield ,CA 93308
Resident Engineer: Robert Decker Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-07-29-39
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Sample Organization Contact: 661-549-8281
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/29/2024
Date that the sample was received by the laboratory/organization performing the testing: 07/29/2024
The quantity of what the sample constitutes: L1SL1-PSE
A brief description of the sample: 3/4" HMA type A
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Griffith Edmonston

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 1
HMA Mix Number:
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 3

Test Results

Test 1 of 3

DIME Test ID: 2024-07-29-39-1
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/05/2024
Date Tested: 07/30/2024
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.437
Bulk Specific Gravity 2 2.452
Bulk Specific Gravity 3 2.47
Average Bulk Specific Gravity 2.453

Test 2 of 3

DIME Test ID: 2024-07-29-39-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/05/2024
Date Tested: 07/29/2024
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of the specimen basket assembly 4303.6 g
Mass of the specimen and specimen basket assembly prior to ignition 6419.1 g
Mass of HMA Sample prior to ignition 2115.5 g
Corrected Asphalt Binder Content 5 %
Mass Loss 115.1 g
Mass of aggregate remaining after ignition 2000.4 g
Correction Factor (Percent by mass of HMA Specimen) 0.44 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 F

Test 3 of 3

DIME Test ID: 2024-07-29-39-3
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/05/2024
Date Tested: 07/29/2024
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of Samples 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7326.7 grams
Mass of oven-dry sample in air for Sample 1 2571.5 grams
Mass of container filled with the sample and water for Sample 1 8898.2 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.572
Theoretical maximum density at 25°C (77°F) 2565 kg/m^3